Thermodynamic Steam Trap Supplier in Surat
A Thermodynamic Steam Trap is an automatic condensate-discharge device used in steam systems to remove condensate while helping prevent the unnecessary escape of live steam. It uses the pressure and velocity differences created by steam and condensate to operate a disc mechanism.
Allarakhu and Sons provides industrial product enquiries for the Thermodynamic Steam Trap category in Surat, Gujarat. The referenced product specification describes a stainless-steel model with a built-in Y-type strainer and BSP screwed-end connection. Buyers should confirm the required operating conditions and connection details before ordering.
Product Overview
The Thermodynamic Steam Trap is designed for suitable industrial steam applications where condensate needs to be discharged from a steam line. Its thermodynamic operating mechanism responds to changing conditions inside the trap, opening to discharge condensate and closing as flash steam creates the pressure conditions needed to seat the disc.
A built-in strainer helps intercept debris before it reaches the trap’s internal components. This can support maintenance of the steam system, although the strainer’s mesh size and cleaning procedure should be confirmed for the exact model.
The referenced product information specifies a ½-inch size, stainless-steel construction and BSP screwed connection. The exact material grade, allowable operating pressure and temperature should be verified with the supplier before final selection.
Key Features
-
Thermodynamic disc operating mechanism for condensate discharge.
-
Stainless-steel construction as stated in the referenced product listing.
-
Built-in Y-type strainer.
-
BSP screwed-end connection as stated in the source.
-
Compact format for suitable steam-line installations.
-
Automatic operation based on changes in steam and condensate conditions.
-
Intended for steam service, subject to confirmation of the operating limits.
-
Suitable selection depends on the steam pressure, differential pressure and condensate load.
Technical Specifications
| Specification | Available information |
|---|---|
| Product name | Thermodynamic Steam Trap |
| Product type | Thermodynamic disc steam trap |
| Nominal size | ½ inch |
| Body material | Stainless steel, as listed by the source |
| Material grade | SS410 (CA-15) is mentioned in the source description; confirm exact grade for the supplied model |
| Connection | BSP screwed end |
| Strainer | Built-in Y-type strainer |
| Service | Steam |
| Pressure information | Source states “32 Kg/cm”; full unit and meaning require confirmation |
| Hydrostatic test | Source lists “32 Kg/cm”; test unit and procedure require confirmation |
| Temperature rating | Not confirmed in the supplied product listing |
| Product code | Not included |
Important specification note: Do not publish “32 Kg/cm” as the confirmed working pressure. Ask the supplier to confirm the complete unit, working-pressure rating, test-pressure basis and allowable operating temperature before publishing the final specification.
Size Range
The referenced listing specifies ½ inch for this product. A wider size range has not been confirmed.
For replacement or new installations, confirm the nominal pipe size, actual connection dimensions and available model options before placing an order.
Connection Options
The source describes a BSP screwed-end connection.
Before purchase, confirm:
-
Whether the existing pipeline uses BSP threads.
-
The required thread configuration and applicable standard.
-
Whether the trap can be installed within the available pipework.
-
The required flow direction and installation orientation.
Do not assume that NPT, socket-weld or flanged versions are available unless confirmed by the supplier.
Design and Construction
The referenced model is described as a stainless-steel thermodynamic steam trap with a built-in Y-type strainer. Thermodynamic traps generally use a disc that opens and closes as pressure and flow conditions change inside the trap.
The built-in strainer is intended to help limit debris entering the operating mechanism. Its screen material, mesh size, cover design and maintenance access should be checked against the exact model documentation.
Pressure Information
Correct pressure selection is essential for reliable steam-trap performance.
The product source gives a pressure figure of “32 Kg/cm” and repeats a similar figure for hydrostatic testing. Because the unit is incomplete and the working and test pressure values are not clearly differentiated, this information should be verified before use.
Confirm the following with the supplier:
-
Maximum allowable working pressure.
-
Minimum and maximum operating differential pressure.
-
Hydrostatic test pressure and test standard.
-
Maximum operating temperature.
-
Maximum permissible condensate backpressure.
Do not select a trap solely on the basis of a test-pressure figure.
Applications
Thermodynamic steam traps are commonly considered for suitable steam-system duties such as:
-
Steam main and distribution-line drainage.
-
Steam-line drip legs.
-
Condensate removal from suitable industrial steam pipelines.
-
Steam tracing applications, where the operating conditions suit a thermodynamic design.
-
General industrial steam-system maintenance and replacement projects.
Actual suitability depends on condensate load, steam pressure, backpressure, air-venting requirements and the equipment being drained. Confirm application compatibility before installation.
Product Selection Guide
Use the following checks when selecting a Thermodynamic Steam Trap:
-
Steam pressure: Confirm the normal and maximum operating pressure.
-
Differential pressure: Check the pressure difference available across the trap under operating conditions.
-
Condensate load: Estimate the condensate discharge requirement, including start-up conditions.
-
Connection size: Confirm that the ½-inch connection matches the intended pipeline.
-
Thread standard: Verify the BSP connection type and compatibility with the existing pipework.
-
Material compatibility: Check the body and internal materials against the steam conditions and condensate quality.
-
Temperature: Confirm the operating temperature is within the model’s rated limits.
-
Installation and maintenance: Check the recommended orientation, strainer access and service procedure.
Industrial Buyer Guide
Before requesting a quotation, prepare the following information:
-
Required quantity.
-
Nominal pipe size.
-
Steam operating pressure and temperature.
-
Expected condensate load.
-
Connection type and thread standard.
-
Required body and internal material grades.
-
Installation location and application.
-
Any existing model datasheet or replacement specifications.
Providing this information helps the supplier assess compatibility and reduces the risk of ordering a trap with an unsuitable pressure rating or connection.
Thermodynamic Steam Trap Supplier in Surat
Allarakhu and Sons is based in Surat, Gujarat, and supplies industrial products for B2B enquiries. Contact the team to discuss your Thermodynamic Steam Trap requirement, confirm available specifications and request a quotation.
The product is relevant to industrial buyers and maintenance teams operating around Surat, including Sachin GIDC, Pandesara, Udhna, Hazira, Palsana and Kadodara. Confirm product availability and technical suitability before ordering.
Gujarat Industrial and GIDC Relevance
Businesses sourcing steam-system components for industrial facilities in Gujarat may enquire about Thermodynamic Steam Traps for maintenance, replacement and new installations.
Relevant industrial areas include:
-
Surat GIDC
-
Sachin GIDC
-
Pandesara
-
Udhna
-
Hazira
-
Palsana
-
Kadodara
-
Ankleshwar GIDC
-
Bharuch GIDC
-
Vapi GIDC
These locations are service and enquiry target areas, not a guarantee of local stock or delivery availability.
India-Wide Industrial Enquiries
Industrial buyers can enquire from locations including Ahmedabad, Mumbai, Pune, Delhi, Bengaluru, Hyderabad, Jaipur, Chennai, Chandigarh, Lucknow, Goa, Indore, Nagpur, Dehradun, Kochi, Shimla, Srinagar, Noida and Gurugram.
For India-wide enquiries, share your required quantity, operating conditions and connection details to help confirm the correct product specification. Availability, dispatch and delivery timelines must be confirmed at the time of enquiry.
Frequently Asked Questions
What is a Thermodynamic Steam Trap?
A Thermodynamic Steam Trap is an automatic device that discharges condensate from a steam system while helping prevent the loss of live steam. It operates using pressure and flow changes associated with steam and condensate.
What size is listed for this Thermodynamic Steam Trap?
The referenced product listing specifies a ½-inch model. Confirm the required size and connection dimensions before ordering.
What material is used in this Thermodynamic Steam Trap?
The source lists stainless steel and mentions SS410 (CA-15) in its description. Confirm the exact body and internal material grades for the supplied model.
Does this Thermodynamic Steam Trap include a strainer?
Yes. The referenced description states that the model has a built-in Y-type strainer. Confirm the screen specifications and maintenance requirements with the supplier.
What connection does this product use?
The source describes a BSP screwed-end connection. Verify the thread type and standard against the existing pipeline.
What is the working-pressure rating?
The source states “32 Kg/cm,” but this is incomplete and does not clearly establish the working-pressure rating. Request written confirmation of the full unit and maximum allowable working pressure before selecting the product.
What is the maximum operating temperature?
The referenced listing does not provide a confirmed operating-temperature limit. Ask the supplier for the model’s rated temperature range.
Where can I enquire about a Thermodynamic Steam Trap in Surat?
You can contact Allarakhu and Sons through its contact page or WhatsApp to discuss product specifications and request a quotation.
B2B Product Enquiry
For a Thermodynamic Steam Trap quotation, provide the size, quantity, steam pressure, temperature, connection standard and intended application.
Contact Allarakhu and Sons
-
Phone: +91 98251 78797 / +91 84011 31000
-
Contact page: https://allarakhuandsons.in/contact-us/
-
WhatsApp enquiry: https://wa.me/919825178797
-
Product category: https://allarakhuandsons.in/product-category/valves/steam-trap-valve/
Request confirmation of the working-pressure rating, hydrostatic test details and operating-temperature limit before finalising your order.
