Cast Iron Bucket Type Steam Trap (Screwed) Supplier

Cast Iron Bucket Type Steam Trap (Screwed) Supplier

Cast Iron Bucket Type Steam Trap (Screwed) is designed to discharge condensate from suitable steam systems while helping prevent the unnecessary loss of live steam. Its inverted-bucket operating mechanism responds to changes in steam and condensate conditions to control the discharge cycle.

The referenced product specification describes a cast-iron body and bolted cover, female BSP screwed ends, and renewable stainless-steel working parts. Allarakhu and Sons provides industrial product enquiries from Surat, Gujarat, for buyers looking to confirm product specifications and sourcing requirements.

Product Overview

The Cast Iron Bucket Type Steam Trap (Screwed) uses an inverted bucket mechanism to operate the trap’s internal valve. As condensate enters the trap, the bucket’s position changes and allows condensate to discharge. Steam entering the bucket changes its buoyancy and operating position, helping the valve close and limit live-steam loss under suitable operating conditions.

The sourced model features a cast-iron body and cover with stainless-steel internal working components. Its female BSP screwed ends are intended for compatible threaded pipe connections. The bolted cover provides access to the internal assembly for inspection and maintenance in accordance with the manufacturer’s instructions.

This product is intended for steam service. Before selecting it, verify the actual operating pressure, temperature, condensate load, connection size and system backpressure against the product’s rated limits.

Key Features

• Inverted-bucket operating mechanism.

• Cast-iron body and cover.

• Female BSP screwed-end connections.

• Renewable stainless-steel working parts.

• Bolted cover construction.

• Maximum working pressure specified as 10.55 kg/cm²g.

• Maximum working temperature specified as 220°C.

• Shell hydrostatic test pressure specified as 21.10 kg/cm²g.

• Multiple nominal sizes listed from ½ inch to 2 inches.

• Intended for suitable industrial steam applications.

Technical Specifications

Pressure and temperature figures above are taken from the referenced product documentation. Confirm that the supplied model and current datasheet match these values before ordering.

Size Range

The source lists the following nominal sizes:

Confirm the required size and current availability with the supplier before placing an order. The size table is a nominal-size reference; check the actual connection and installation dimensions against the relevant datasheet.

Connection Options

The referenced model uses female BSP screwed ends.

Before purchasing, check:

• Whether the existing pipeline uses compatible BSP threads.

• The required nominal pipe size.

• The available installation space and access for maintenance.

• The recommended flow direction and installation orientation.

• Whether the operating conditions fall within the trap’s rated pressure and temperature limits.

Do not assume that flanged, socket-weld or other threaded connection versions are available under this product listing without confirmation.

Design / Construction

Cast-Iron Body and Cover

The product specification identifies cast iron for both the body and cover. The source lists IBR 86 to 93 Grade A for these components. Confirm the applicable documentation for the actual supplied model if certification or traceability is required for a project.

Inverted-Bucket Mechanism

The inverted-bucket design uses the position and buoyancy of the internal bucket to operate the valve. This mechanism responds to the presence of condensate and steam within the trap, supporting automatic condensate discharge under suitable operating conditions.

Stainless-Steel Working Parts

The source specifies stainless-steel working components, including Type 304 valve parts and a Type 304 valve seat. It also lists a Type 410 stainless-steel plug. These material details should be checked against the current product datasheet for the exact configuration being supplied.

Bolted Cover

The bolted cover provides access to internal parts for inspection and servicing. Follow the manufacturer’s maintenance procedure and ensure the trap is safely isolated, depressurised and cooled before service.

Pressure Information

The product source specifies these pressure values:

• Maximum working pressure: 10.55 kg/cm²g (150 psig)

• Shell hydrostatic test pressure: 21.10 kg/cm²g (300 psig)

These figures describe different conditions. The hydrostatic shell test pressure must not be treated as the allowable working pressure.

When selecting the trap, check the system’s normal and maximum steam pressure, pressure differential across the trap, condensate backpressure and start-up conditions. Confirm suitability with the current manufacturer datasheet and the operating requirements of the installation.

Applications

The Cast Iron Bucket Type Steam Trap (Screwed) is intended for suitable steam applications where condensate needs to be removed from a steam system.

Potential application areas include:

• Steam distribution lines.

• Condensate drainage points in suitable steam pipework.

• Industrial process steam systems.

• Steam-line maintenance and replacement projects.

• Plant utility systems that operate within the trap’s rated limits.

These are general application contexts for the product type. Confirm suitability for the specific equipment, condensate load, operating pressure and backpressure before installation. The referenced product listing identifies steam as the suitable service.

Product Selection Guide

Choose the appropriate trap by checking the following:

1. Operating pressure: Confirm that the normal and maximum steam pressure remain within the rated working limit.

2. Temperature: Verify that the operating temperature does not exceed the listed maximum of 220°C.

3. Condensate load: Establish the expected condensate quantity during normal operation and start-up.

4. Pipe size: Match the trap’s nominal size to the intended pipeline connection.

5. Thread compatibility: Confirm the female BSP connection is compatible with the existing pipework.

6. Backpressure: Consider the pressure in the condensate return system, as it affects trap operation.

7. Material requirements: Check the cast-iron body and stainless-steel internal materials against the system conditions.

8. Maintenance access: Allow sufficient space for inspection and servicing of the bolted-cover assembly.

For critical steam applications, use the manufacturer’s sizing and installation guidance rather than selecting a trap by pipe size alone.

Industrial Buyer Guide

Industrial purchasing teams should prepare the following details before requesting a quotation:

• Required quantity and nominal size.

• Steam operating pressure and temperature.

• Expected condensate load.

• Existing pipe thread and connection details.

• Application and installation location.

• Any required material documentation or project-specific compliance documents.

• Replacement details or an existing datasheet, if applicable.

Sharing these details helps the supplier assess whether the product specification matches the intended installation. Price, availability, delivery schedule and any project-specific documentation should be confirmed during the enquiry.

Supplier in Surat

Allarakhu and Sons is based in Surat, Gujarat, and handles enquiries for industrial products. Buyers looking for a Cast Iron Bucket Type Steam Trap (Screwed) can contact the team to discuss the required size, operating conditions and product documentation.

Industrial buyers in Surat can enquire about requirements for facilities in Sachin GIDC, Pandesara, Udhna, Hazira, Palsana and Kadodara. Confirm availability and supply arrangements directly before placing an order.

Gujarat Industrial & GIDC Relevance

This product may be relevant to suitable steam-system maintenance and procurement requirements across industrial areas in Gujarat, including:

• Surat GIDC

• Sachin GIDC

• Pandesara

• Udhna

• Hazira

• Palsana

• Kadodara

• Ankleshwar GIDC

• Bharuch GIDC

• Vapi GIDC

These are relevant industrial enquiry areas, not a guarantee of local inventory or delivery coverage. Buyers should confirm the supply arrangement and technical fit for their installation.

India-Wide Industrial Enquiry

Industrial buyers can enquire from Ahmedabad, Mumbai, Delhi, Bengaluru, Pune, Hyderabad, Jaipur, Chennai, Chandigarh, Lucknow, Goa, Indore, Nagpur, Dehradun, Kochi, Shimla, Srinagar, Noida and Gurugram.

For a more accurate quotation, provide the required size, quantity, working pressure, temperature and connection details. Availability, dispatch and delivery timelines must be confirmed directly with Allarakhu and Sons.

FAQs

What is a Cast Iron Bucket Type Steam Trap (Screwed)?

It is a steam condensate removal device that uses an inverted-bucket mechanism to operate its internal valve. The referenced model has a cast-iron body and cover with stainless-steel working parts.

What connection does this steam trap use?

The product source specifies female BSP screwed ends. Confirm thread compatibility with the existing pipework before purchase.

What is the maximum working pressure?

The referenced product documentation lists a maximum working pressure of 10.55 kg/cm²g, equivalent to 150 psig. Confirm the rating against the current datasheet for the exact supplied model.

What is the maximum working temperature?

The source lists a maximum working temperature of 220°C. The actual installation must remain within the product’s approved operating limits.

What is the shell hydrostatic test pressure?

The source lists a shell hydrostatic test pressure of 21.10 kg/cm²g, equivalent to 300 psig. This is a test-pressure figure and should not be confused with the maximum working pressure.

Which sizes are listed?

The source lists ½-inch, ¾-inch, 1-inch, 1¼-inch, 1½-inch and 2-inch sizes. Confirm the required size and availability before ordering.

What materials are used in the trap?

The source identifies cast iron for the body and cover and stainless steel for several working parts. It specifies Type 304 stainless steel for the valve and valve seat and Type 410 stainless steel for the plug.

What information should I provide when requesting a quotation?

Provide the required size, quantity, steam pressure, operating temperature, connection details and intended application. This information helps the supplier assess compatibility and prepare the enquiry.

Where can I enquire about this product in Surat?

Contact Allarakhu and Sons through its contact page or WhatsApp to discuss the required size and specifications.

B2B Product Enquiry

For a quotation for the Cast Iron Bucket Type Steam Trap (Screwed), contact Allarakhu and Sons with your required size and operating details.

Company: Allarakhu and Sons Address: A-3, 7/4720, Badri Mansion, Lal Darwaja Station Road, Surat – 395003, Gujarat, India

• Phone: +91 98251 78797

• Alternate phone: +91 84011 31000

• Contact page: https://allarakhuandsons.in/contact-us/

• WhatsApp enquiry: https://wa.me/919825178797

• Product category: https://allarakhuandsons.in/product-category/valves/steam-trap-valve/

When enquiring, mention the required size and confirm the maximum working pressure, maximum temperature and BSP thread compatibility before finalising the order.