SS Y-Type Strainer Flanged Supplier in Surat

SS Y-Type Strainer Flanged Supplier in Surat

An SS Y-Type Strainer Flanged is fitted into a compatible pipeline to help capture solid debris carried by the flowing medium. Retaining particles can help reduce debris entering downstream equipment, subject to the selected screen specification and operating conditions.

The Y-shaped body houses the screening element, while the flanged ends provide a bolted connection to compatible pipeline flanges. Stainless-steel construction is specified for both the body and screen in the referenced product listing. Buyers should still verify the exact stainless-steel grade, flange dimensions and pressure-temperature limits for the supplied configuration.

Key Features

• Y-type strainer configuration.

• Stainless-steel body, as listed by the source.

• Stainless-steel screen, as listed by the source.

• 80-mesh screen specification.

• Flanged end connection.

• Listed nominal size: 6 inches (150 mm).

• Listed pressure class: Class 150.

• Water listed as the application medium.

• Intended for pipeline filtration where the selected materials and operating conditions are suitable.

Technical Specifications

Technical clarification: A Class 150 designation should not be interpreted as a universal working-pressure value in psi or kg/cm². The allowable pressure depends on the applicable design standard, material and temperature. Confirm the 32 kg/cm² figure with the supplier before relying on it.

Size and Configuration

The referenced listing identifies the product as a 6-inch (150 mm) model. It does not establish a complete size range for this exact configuration.

If your project requires another size, ask the supplier to confirm whether a matching stainless-steel flanged model is available. Do not assume that other sizes share the same screen, material or pressure specifications.

Flanged Connection Details

The flanged-end arrangement allows the strainer to be connected to compatible flanged pipework. Before ordering, confirm:

• Nominal pipe size.

• Flange standard and pressure class.

• Flange-face type and drilling.

• Face-to-face dimension.

• Gasket and bolting requirements.

• Compatibility with the existing pipeline and adjoining equipment.

Matching the nominal size alone is not enough to establish flange compatibility.

Design and Construction

The Y-type configuration provides an internal area for the screening element to retain particles from the flowing medium. According to the source, both the body and screen are stainless steel.

The exact stainless-steel grade, gasket material, cover arrangement and screen-removal design are not specified in the listing. Confirm these details from the current technical documentation, particularly when corrosion resistance, cleaning frequency or process-fluid compatibility is important.

Pressure Information

The product listing identifies a Class 150 pressure rating and separately states a capacity of 32 kg/cm². These figures should not be treated as interchangeable without supporting documentation.

Before specifying the product, request confirmation of the applicable design standard, maximum allowable working pressure at the operating temperature, and any relevant test-pressure information. Do not use a test pressure as the working-pressure rating.

Applications

The source lists water as the medium for this product. Its suitability for a particular water system depends on the confirmed material grade, operating pressure, temperature, screen specification and installation requirements.

Potential applications to evaluate include:

• Industrial water pipelines.

• Utility-water systems.

• Water-transfer installations requiring particle filtration.

• Compatible process-water lines.

• Pipeline systems where a stainless-steel strainer and flanged connection are specified.

Do not assume suitability for chemicals, oils, steam or other media without confirming material compatibility and operating limits.

Product Selection Guide

Before selecting an SS Y-Type Strainer Flanged, check the following:

• Pipe size: The referenced model is 6 inches (150 mm). Confirm the required nominal size.

• Flange compatibility: Verify the flange standard, pressure class, drilling and face type.

• Screen specification: Confirm whether the listed 80-mesh screen meets the filtration requirement.

• Material grade: Ask for the exact stainless-steel grade for the body and screen.

• Operating pressure: Obtain the approved working-pressure rating at the required temperature.

• Fluid compatibility: Confirm suitability for the actual medium. The source specifically lists water.

• Maintenance: Check access for screen inspection and cleaning in line with the supplier’s instructions.

Industrial Buyer Guide

For industrial procurement, a suitable strainer must meet the pipeline’s filtration, material and operating requirements—not just the nominal size.

When requesting a quotation, share the pipe size, flange standard, fluid, operating pressure, temperature, mesh requirement and quantity. For engineering approval, request the current datasheet and applicable inspection or test documentation.

SS Y-Type Strainer Flanged Supplier in Surat

Allarakhu and Sons is based in Surat, Gujarat, India, and receives enquiries for industrial piping and valve requirements. Buyers can contact the company to discuss the required SS Y-Type Strainer Flanged configuration and verify its technical suitability.

For a more accurate enquiry, include the size, flange details, required screen specification and operating conditions.

Contact details

• Phone: +91 98251 78797

• Alternate phone: +91 84011 31000

• Address: A-3, 7/4720, Badri Mansion, Lal Darwaja Station Road, Surat – 395003, Gujarat, India

• Contact page: https://allarakhuandsons.in/contact-us/

• WhatsApp enquiry: https://wa.me/919825178797

Gujarat Industrial and GIDC Enquiries

Industrial buyers in Surat and nearby manufacturing areas can enquire about SS Y-Type Strainer Flanged requirements for compatible pipeline systems.

Relevant industrial locations include Surat GIDC, Sachin GIDC, Pandesara, Udhna, Hazira, Palsana and Kadodara. Enquiries may also come from Ankleshwar GIDC, Bharuch GIDC and Vapi GIDC.

For project-based enquiries, provide the required specifications and quantity so the appropriate configuration can be assessed.

India-Wide Industrial Enquiries

Allarakhu and Sons can receive enquiries from industrial buyers across India, including Delhi, Mumbai, Bengaluru, Pune, Hyderabad, Ahmedabad, Jaipur, Chennai, Chandigarh, Lucknow, Goa, Indore, Nagpur, Dehradun, Kochi, Shimla, Srinagar, Noida and Gurugram.

Include the delivery destination and technical requirements when requesting a quotation. Availability, dispatch arrangements and delivery timelines should be confirmed directly.

Frequently Asked Questions

What is an SS Y-Type Strainer Flanged?

It is a pipeline filtration component with a Y-shaped body, stainless-steel construction and flanged connections. It helps retain solid particles before they travel further through a compatible pipeline.

What size is listed for this product?

The referenced listing specifies a 6-inch (150 mm) model. Confirm availability and the exact dimensions before ordering.

What material is used for the body and screen?

The source lists stainless steel for both the body and screen. The exact stainless-steel grade is not specified, so request confirmation before purchase.

What is the screen mesh size?

The referenced listing specifies an 80-mesh screen. Confirm that this filtration level meets your process requirements.

What is the pressure rating?

The source lists a Class 150 pressure rating and separately states a capacity of 32 kg/cm². These values need technical clarification before being used as the allowable working pressure.

Is this strainer suitable for water?

Water is the medium listed in the source. Suitability for a specific water system still depends on operating conditions, material grade and installation requirements.

Can it be used for chemicals or oil?

Do not assume suitability for chemicals, oil or other media from the supplied listing. Confirm the body, screen and sealing materials against the fluid and operating conditions.

How can I request a quotation from Allarakhu and Sons?

Visit https://allarakhuandsons.in/contact-us/ or use https://wa.me/919825178797. Include the required size, flange standard, screen mesh, operating conditions and quantity.

B2B Product Enquiry

To request a quotation for SS Y-Type Strainer Flanged, provide:

• Required quantity.

• Nominal size.

• Required stainless-steel grade.

• Flange standard and pressure class.

• Required screen mesh.

• Fluid or process medium.

• Operating pressure and temperature.

• Project location and delivery requirements.

Contact Allarakhu and Sons through the contact page or send your requirements using WhatsApp.