Y-Strainer Screwed End Supplier in Surat

Y-Strainer Screwed End

Y-Strainer Screwed End is an industrial pipeline filtration component designed to help capture unwanted solid particles from flowing media before they reach downstream equipment. Its Y-shaped body and threaded connections make it an option for compatible piping systems where a compact strainer arrangement is required. Allarakhu and Sons, based in Surat, Gujarat, can assist industrial buyers with product enquiries and specification checks.

The referenced product specification lists sizes from ½ inch to 2 inches (DN15–DN50), a full-bore design and a stated working pressure of 800 WOG. Thread options are listed against BS 21 BSP/BSPT, NPT, DIN 259/2999, ISO 228 and ISO 7/1. Confirm the required thread type, materials and service conditions before ordering.

Product Overview

A Y-strainer is installed in a pipeline to retain debris that could otherwise move further into the system. Depending on the selected configuration and service conditions, it can form part of a line protecting pumps, control equipment, instruments and other downstream components.

The screwed-end configuration uses threaded connections rather than integrated flanges. This can suit smaller-bore piping systems where the thread standard and installation arrangement match the connected pipework.

Key Features

• Y-type body configuration.

• Full-bore design, as stated in the referenced specification.

• Screwed or threaded end connections.

• Published size range of ½ inch to 2 inches (DN15–DN50).

• Published working pressure of 800 WOG.

• Precision investment-cast construction, as described by the source.

• Multiple listed thread standards; confirm the exact thread required before ordering.

Technical Specifications

Technical note: The source’s thread-standard text contains a likely typographical error in “ISO 7/1.” Verify the applicable thread standard against the supplier’s current datasheet. Do not treat the listed working pressure as a hydrostatic test pressure.

Size Range

The source lists the Y-Strainer Screwed End in the following nominal size range:

• ½ inch (DN15)

• ¾ inch (DN20)

• 1 inch (DN25)

• 1¼ inches (DN32)

• 1½ inches (DN40)

• 2 inches (DN50)

Confirm the exact size available for the required configuration before placing an order.

Connection Options

The product source lists screwed threads referencing BSP, BSPT, NPT, DIN 259/2999, ISO 228 and ISO 7/1. These standards are not interchangeable in every application. Specify the exact thread form and size used in your piping system so compatibility can be checked before supply.

Design and Construction

The Y-shaped body provides a branch where collected particles can be retained by the internal screening element. The screen’s exact material, mesh or perforation size and removal arrangement are not stated in the supplied listing, so these details should be confirmed for the selected product.

The referenced source describes the construction as precision investment cast. The actual body and screen materials should be confirmed against the current product datasheet.

Pressure Information

The source publishes a working-pressure value of 800 WOG. Confirm the applicable pressure-temperature limits, media compatibility and product documentation for your installation. Do not use this value alone to establish suitability for steam, high-temperature service or a specific chemical.

Applications

A Y-strainer is commonly considered for pipeline systems where filtration of solid debris is needed before downstream equipment. Suitability depends on the product materials, screen specification, operating conditions and media.

Potential application areas to evaluate include:

• Industrial liquid-transfer pipelines.

• Utility and service-water lines.

• Process piping where compatible filtration is required.

• Pipeline installations needing a threaded strainer connection.

• Systems where pumps, instruments or other downstream components require debris protection.

These are general application examples, not a claim that the referenced model is suitable for every fluid or operating condition.

Product Selection Guide

Before selecting a Y-Strainer Screwed End, check the following:

• Pipeline size: Match the nominal strainer size to the pipe connection.

• Thread standard: Confirm BSP, BSPT, NPT or the exact specified thread form.

• Operating pressure: Check the working pressure against actual operating and surge conditions.

• Temperature: Obtain confirmation of the permitted operating range for the exact model.

• Fluid compatibility: Verify the body, screen and sealing materials against the process media.

• Filtration requirement: Ask for the available screen mesh or perforation specification.

• Maintenance access: Ensure the installation allows the screen to be inspected and cleaned according to the supplier’s instructions.

Industrial Buyer Guide

For industrial procurement teams, choosing a strainer involves more than matching the connection size. A suitable product must also meet the operating conditions and maintenance requirements of the pipeline.

When requesting a quotation, provide the nominal pipe size, thread type, fluid, operating pressure, temperature, required screen specification and quantity. If the strainer will be used in a critical process, request the current datasheet and applicable inspection or test documentation before approval.

Y-Strainer Screwed End Supplier in Surat

Allarakhu and Sons is based in Surat, Gujarat, India, and receives industrial product enquiries for piping and valve requirements. Buyers can contact the company to discuss the required Y-Strainer Screwed End configuration, size and technical specifications.

For your enquiry, share the pipe size, thread standard, operating conditions and quantity to help establish the correct product requirements.

Contact Allarakhu and Sons

• Phone: +91 98251 78797

• Alternate phone: +91 84011 31000

• Address: A-3, 7/4720, Badri Mansion, Lal Darwaja Station Road, Surat – 395003, Gujarat, India

• Contact page: https://allarakhuandsons.in/contact-us/

• WhatsApp enquiry: https://wa.me/919825178797

Gujarat Industrial and GIDC Enquiries

Industrial buyers in Surat and nearby manufacturing areas can enquire about Y-Strainer Screwed End requirements for compatible piping systems.

Relevant industrial locations include Surat GIDC, Sachin GIDC, Pandesara, Udhna, Hazira, Palsana and Kadodara. Enquiries may also come from Ankleshwar GIDC, Bharuch GIDC and Vapi GIDC.

For these locations, focus the enquiry on the technical requirement and project scope rather than assuming that every configuration is available locally.

India-Wide Industrial Enquiries

Allarakhu and Sons can receive enquiries from industrial buyers across India, including Delhi, Mumbai, Bengaluru, Pune, Hyderabad, Ahmedabad, Jaipur, Chennai, Chandigarh, Lucknow, Goa, Indore, Nagpur, Dehradun, Kochi, Shimla, Srinagar, Noida and Gurugram.

Share the required product specifications and delivery destination when requesting a quotation. Availability, dispatch arrangements and delivery timelines should be confirmed directly.

Frequently Asked Questions

What is a Y-Strainer Screwed End?

A Y-Strainer Screwed End is a pipeline filtration component with a Y-shaped body and threaded connections. It is used to retain solid particles from flowing media before they reach downstream equipment.

What sizes are listed for this Y-strainer?

The referenced listing gives a range of ½ inch to 2 inches, corresponding to DN15–DN50. Confirm the exact required size and availability before ordering.

What is the working pressure of the product?

The referenced listing states 800 WOG. Verify the current datasheet and applicable pressure-temperature limits for the specific configuration and service conditions.

Which thread types are listed?

The source references BSP, BSPT, NPT, DIN 259/2999, ISO 228 and ISO 7/1. Confirm the exact applicable standard with the supplier, as thread forms can differ.

What materials are used for the body and screen?

The supplied product listing does not clearly specify the body and screen materials. Request the current datasheet to confirm these details before purchase.

Is the Y-Strainer Screwed End suitable for every type of fluid?

No. Suitability depends on the body and screen materials, seals, operating pressure, temperature and fluid compatibility. Confirm these details before using the product in a particular process.

How do I choose the correct strainer?

Match the pipe size and thread standard, then verify the pressure, temperature, media compatibility and required screen specification. Also ensure that the installed strainer can be inspected and maintained safely.

How can I request a quotation from Allarakhu and Sons?

Visit https://allarakhuandsons.in/contact-us/ or use https://wa.me/919825178797. Include the size, thread standard, operating conditions, quantity and delivery location in your enquiry.

B2B Product Enquiry

To enquire about Y-Strainer Screwed End, include the following information:

• Required quantity.

• Nominal size, from ½ inch to 2 inches if applicable.

• Required thread standard.

• Fluid or process media.

• Operating pressure and temperature.

• Required body and screen materials.

• Screen mesh or perforation requirement.

• Project location and delivery requirements.

Contact the team through the Allarakhu and Sons contact page or send an enquiry through WhatsApp.