Y-Strainer Flanged End Supplier in Surat

Y-Strainer Flanged End

Y-Strainer Flanged End is an industrial pipeline filtration component designed to help capture unwanted solid particles from flowing media before they reach downstream equipment. Its Y-shaped body and integrated flanges provide a flanged connection arrangement for compatible piping systems. Allarakhu and Sons, based in Surat, Gujarat, welcomes enquiries from industrial buyers seeking product specifications and supply information.

The referenced product specification lists a full-bore design, nominal sizes from 1 inch to 4 inches (DN25–DN100), a working pressure of 800 WOG and an operating temperature range of −10°C to +100°C. The source also describes the construction as precision investment cast. Confirm the body and screen materials, flange standard and other project-specific requirements before ordering.

Detailed Product Description

Product Overview

A Y-Strainer Flanged End is installed in a pipeline to retain solid debris carried by the process fluid. Depending on the application and system design, a suitable strainer can help reduce the amount of dirt, scale and other particles reaching downstream equipment.

The flanged-end configuration uses integrated flanges to connect with compatible flanged pipework. Correct selection requires checking the nominal size, flange dimensions and drilling, pressure-temperature limits, media compatibility and screen specification.

This product is intended for buyers who need a Y-type strainer with flanged connections. The exact configuration should be verified against the supplier’s current technical documentation before it is specified for an industrial project.

Key Features

• Y-type body configuration.

• Integrated flanges, as listed in the source.

• Full-bore design.

• Published nominal size range of 1 inch to 4 inches (DN25–DN100).

• Published working pressure of 800 WOG.

• Published working temperature range of −10°C to +100°C.

• Precision investment-cast construction, as described by the source.

• Suitable for consideration in compatible pipeline filtration systems, subject to confirmation of materials and operating conditions.

Technical Specifications

Technical clarification: The listed 800 WOG figure is the source’s stated working pressure. Do not treat it as a hydrostatic test pressure or assume a particular flange class without the applicable datasheet.

Size Range

The referenced source lists the following nominal size range:

• 1 inch (DN25)

• 1¼ inches (DN32)

• 1½ inches (DN40)

• 2 inches (DN50)

• 2½ inches (DN65)

• 3 inches (DN80)

• 4 inches (DN100)

Confirm the exact available sizes and the dimensions for the selected flange configuration before placing an order.

Flanged Connection Details

The integrated flanges connect the strainer to compatible flanged piping. Before procurement, confirm:

• Required nominal pipe size.

• Flange standard and pressure class.

• Flange face type and drilling.

• Face-to-face dimension.

• Gasket and bolting requirements.

• Compatibility with the existing pipeline and adjoining equipment.

Do not assume that two flanged strainers are interchangeable simply because their nominal sizes match.

Design and Construction

The Y-shaped configuration provides an internal area where the screening element can retain particles from the flowing medium. The source describes this model as precision investment cast and lists integrated flanges.

The supplied product summary does not identify the body alloy, screen material, mesh size, cover arrangement or sealing materials. These details should be confirmed with the current product datasheet, especially where corrosion resistance, filtration level or operating temperature is important.

Pressure and Temperature Information

The referenced specification states a working pressure of 800 WOG and a working temperature range of −10°C to +100°C. Verify that these limits apply to the exact configuration being offered and are appropriate for the intended medium and operating conditions.

Pressure capability can depend on material, temperature, flange configuration and other design details. Obtain the supplier’s confirmation before using the published figures for engineering approval.

Applications

Y-strainers are commonly considered in pipeline systems where solid-particle filtration is needed upstream of equipment or process components. The suitability of this specific product depends on its confirmed materials, screen specification and operating limits.

Potential applications to assess include:

• Industrial liquid-handling pipelines.

• Utility and service-water systems.

• Process lines requiring debris filtration.

• Piping systems where flanged connections are specified.

• Systems requiring protection of compatible downstream components.

These are general application examples, not confirmation that this model is suitable for every fluid, pressure or temperature.

Product Selection Guide

Before selecting a Y-Strainer Flanged End, review these factors:

• Pipe size: Match the nominal size to the pipeline.

• Flange compatibility: Confirm the flange standard, pressure class, face type and bolt-hole arrangement.

• Operating pressure: Check the system’s normal and maximum pressures against the approved product rating.

• Temperature: Verify the permitted operating range for the selected model.

• Fluid compatibility: Confirm that the body, screen and sealing materials suit the process medium.

• Filtration level: Specify the required mesh size or perforation.

• Maintenance access: Allow sufficient space for inspection and screen cleaning in accordance with supplier instructions.

Industrial Buyer Guide

For industrial procurement, matching the connection and size is only the first step. Buyers should also verify the filtration requirement, pressure-temperature conditions, material compatibility and documentation needed for project approval.

When requesting a quotation, provide the required size, flange standard, operating conditions, process medium, screen specification, quantity and delivery location. For critical applications, request the current technical datasheet and relevant inspection or test documents.

Y-Strainer Flanged End Supplier in Surat

Allarakhu and Sons is based in Surat, Gujarat, India, and receives enquiries for industrial piping and valve requirements. Buyers can contact the company to discuss the required Y-Strainer Flanged End configuration and confirm its technical suitability.

For an accurate enquiry, share the nominal size, flange requirements, operating pressure, temperature and process medium.

Contact details

• Phone: +91 98251 78797

• Alternate phone: +91 84011 31000

• Address: A-3, 7/4720, Badri Mansion, Lal Darwaja Station Road, Surat – 395003, Gujarat, India

• Contact page: https://allarakhuandsons.in/contact-us/

• WhatsApp enquiry: https://wa.me/919825178797

Gujarat Industrial and GIDC Enquiries

Industrial buyers in Surat and nearby manufacturing areas can enquire about Y-Strainer Flanged End requirements for compatible pipeline systems.

Relevant industrial locations include Surat GIDC, Sachin GIDC, Pandesara, Udhna, Hazira, Palsana and Kadodara. Enquiries may also come from Ankleshwar GIDC, Bharuch GIDC and Vapi GIDC.

For project-based requirements, include the technical specifications and quantity so the appropriate configuration can be assessed.

India-Wide Industrial Enquiries

Allarakhu and Sons can receive enquiries from industrial buyers across India, including Delhi, Mumbai, Bengaluru, Pune, Hyderabad, Ahmedabad, Jaipur, Chennai, Chandigarh, Lucknow, Goa, Indore, Nagpur, Dehradun, Kochi, Shimla, Srinagar, Noida and Gurugram.

Share the delivery destination and required specifications when requesting a quotation. Product availability, dispatch arrangements and delivery timelines should be confirmed directly.

Frequently Asked Questions

What is a Y-Strainer Flanged End?

A Y-Strainer Flanged End is a pipeline filtration component with a Y-shaped body and integrated flanges. It is designed to retain solid particles from flowing media before they reach downstream equipment.

What sizes are listed for this product?

The referenced source lists sizes from 1 inch to 4 inches, corresponding to DN25–DN100. Confirm the required size and availability before ordering.

What is the working pressure?

The source lists a working pressure of 800 WOG. Confirm the applicable rating for the exact model and service conditions before specifying the product.

What is the operating temperature range?

The source lists a range of −10°C to +100°C. Verify that this range applies to the offered configuration and intended process medium.

Which flange standard does the product use?

The source summary does not specify the flange standard or pressure class. Request the current datasheet to confirm flange drilling, face type and dimensions.

What material is the strainer made from?

The source summary describes the construction as precision investment cast but does not identify the body or screen material. Confirm these details with the supplier before purchase.

What is the purpose of a Y-strainer?

A Y-strainer retains solid particles from a flowing medium to help reduce debris reaching downstream equipment. Its effectiveness depends on the selected screen specification and operating conditions.

How can I request a quotation from Allarakhu and Sons?

Visit https://allarakhuandsons.in/contact-us/ or use https://wa.me/919825178797. Include the size, flange standard, operating conditions, required materials and quantity.

B2B Product Enquiry

To request a quotation for Y-Strainer Flanged End, provide:

• Required quantity.

• Nominal size.

• Flange standard and pressure class.

• Required body and screen materials.

• Fluid or process medium.

• Operating pressure and temperature.

• Required screen mesh or perforation.

• Project location and delivery requirements.

Contact Allarakhu and Sons through the contact page or send your requirements using WhatsApp.