Butterfly Valve (Wafer Type), PN 1.6 with Electrical Actuator
Butterfly Valve (Wafer Type), PN 1.6 with Electrical Actuator is designed for suitable industrial pipeline applications where electrically controlled valve operation is required. The wafer-type construction allows installation between compatible pipeline flanges.
The valve uses an S.G. Iron body with a stainless-steel disc. The disc is accurately guided between two stainless-steel stems, while the electrical actuator provides powered opening and closing of the valve.
The actuator incorporates position indication and an adjustable centre stopper for both open and closed positions. The configuration is also specified as compatible with Building Management Systems and Programmable Logic Control applications.
Key Features
- Wafer-type butterfly valve construction
- PN 1.6 pressure rating
- Electrical actuator operation
- S.G. Iron construction
- Stainless-steel S.S 304 / CF8 disc
- Two-piece stainless-steel stem design
- Position indicator on actuator
- Adjustable centre stopper for open and closed positions
- BMS and PLC compatibility
- Inbuilt thermal protection
- Inbuilt space heater
- Inbuilt micro-switch position feedback
- IP67 / IP68 protection available
- 230 VAC standard input voltage
- 24 VDC input option available on demand
- Manual operation through Allen key
- EPDM / Nitrile lining
- Optional Neoprene, Viton, Silicon and Buna-N lining
- Available from 40 mm to 300 mm
Electrical Actuator Operation
The electrical actuator provides powered operation for the valve. The actuator includes a position indicator and adjustable centre stopper for both the open and closed positions.
An inbuilt micro-switch provides position feedback. The actuator also includes thermal protection and a space heater according to the specified configuration.
The standard input voltage is 230 VAC. A 24 VDC input configuration can also be provided on demand according to requirement.
BMS and PLC Compatibility
The electrical actuator configuration is specified as compliant with Building Management Systems and Programmable Logic Control applications.
This makes the valve suitable for industrial installations where electrically operated valve control and position feedback are required.
Control-panel and magnetic-sensor configurations are also available according to the applicable requirement.
Outdoor Protection
IP67 / IP68 protection is available for outdoor applications. Where the valve and actuator are exposed to continuous weather conditions, a suitable canopy is advised for enhanced protection.
Outdoor installation should consider the actual environmental conditions, electrical requirements and protection level required for the installation.
S.S 304 Disc
The valve is supplied with a stainless-steel disc specified as IS 3444 Grade 1 / ASTM A351 Grade CF8, corresponding to the S.S 304 configuration.
The disc is accurately guided between the upper and lower stainless-steel stems. An S.S 316 / CF8M disc can also be provided according to requirement.
Disc material selection should be checked against the actual pipeline medium, pressure and temperature before final selection.
S.G. Iron Body
The valve body is manufactured from S.G. Iron according to IS 1865 Grade 400/15.
The body provides the structural housing for the disc, stems, actuator base, lining and associated valve components.
Two-Piece Stem Design
The valve incorporates upper and lower stainless-steel stems. The stems are specified according to IS 6603 Grade 12 Cr12.
The two-piece stem arrangement is precisely guided between the specified PTFE and bronze bushes and connects the actuator mechanism to the valve disc.
Body Lining
The valve uses integrally moulded rubber lining to provide seating to the disc and act as a primary seal around the stem and gasket joint with matching pipe flanges.
EPDM and Nitrile are specified lining options. Neoprene, Viton, Silicon and Buna-N lining configurations can also be provided according to requirement.
Lining selection should be based on the actual operating medium, chemical compatibility, operating pressure and temperature.
Pressure and Temperature Rating
The valve is rated PN 1.6 with a maximum working pressure of 1.6 MPa.
The specified hydrostatic shell test pressure is 2.4 MPa, while the seat hydrostatic test pressure is 1.76 MPa.
The specified maximum working temperature is 90°C.
Flange Compatibility
The wafer configuration is compatible for sandwich installation between suitable flanges according to the specified flange standards.
The listed compatibility includes BS 10 Tables D, E, F and H, DIN, PN 10, PN 16, PN 25, PN 40, ASA 150, ASA 300, IS 778, IS 6392 Table 17 and IS 1538.
Customers should verify the flange standard, pressure class, dimensions and bolt arrangement before installation.
Suitable Media
The specified valve configuration is suitable for applicable systems handling:
- Steam
- Water
- Oil
- Air
- Gases
Final material and lining selection should be based on actual service conditions and media compatibility.
Available Sizes
- 40 mm / 1½ inch
- 50 mm / 2 inch
- 65 mm / 2½ inch
- 80 mm / 3 inch
- 100 mm / 4 inch
- 125 mm / 5 inch
- 150 mm / 6 inch
- 200 mm / 8 inch
- 250 mm / 10 inch
- 300 mm / 12 inch
The supplied technical source lists sizes from 40 mm through 300 mm for this configuration.
Dimensions
| Size | A ±1.5 | ØB | C Approx. | D Approx. |
|---|---|---|---|---|
| 40 mm / 1½ inch | 33 mm | 40.6 mm | 57 mm | 283 mm |
| 50 mm / 2 inch | 43 mm | 52.4 mm | 73 mm | 293 mm |
| 65 mm / 2½ inch | 46 mm | 67 mm | 80 mm | 306 mm |
| 80 mm / 3 inch | 46 mm | 81.3 mm | 88 mm | 313 mm |
| 100 mm / 4 inch | 52 mm | 101 mm | 110 mm | 333 mm |
| 125 mm / 5 inch | 56 mm | 127.1 mm | 122 mm | 342 mm |
| 150 mm / 6 inch | 56 mm | 151 mm | 151 mm | 370 mm |
| 200 mm / 8 inch | 60 mm | 201.6 mm | 180 mm | 485 mm |
| 250 mm / 10 inch | 68 mm | 252.2 mm | 220 mm | 516 mm |
| 300 mm / 12 inch | 78 mm | 301.3 mm | 250 mm | 540 mm |
Dimensions marked approximately are subject to approximately ±10 mm tolerance.
Industrial Applications
This electrically operated wafer butterfly valve can be considered for suitable industrial and infrastructure applications where electrically controlled flow isolation or control is required.
- Industrial water pipelines
- Water treatment systems
- Process piping systems
- Steam pipelines
- Oil handling systems
- Compressed air systems
- Gas pipeline systems
- Utility pipelines
- Industrial plants
- Building services
- Automated water systems
- Infrastructure projects
Zero Water Waste Installations
The product source specifically identifies this valve configuration as instrumental in zero water waste installations.
Its electrical actuator and position-feedback features can support installations where automated or controlled valve operation is required.
Industrial Valve Supply in Surat
Allarakhu & Sons supplies industrial valves and piping products from Surat, Gujarat, for industrial, commercial and project requirements.
Our industrial supply coverage includes Surat GIDC, Sachin GIDC, Pandesara, Udhna, Hazira, Palsana and Kadodara, along with Ankleshwar GIDC, Bharuch GIDC and Vapi GIDC.
Customers can contact Allarakhu & Sons for product availability, technical requirements, bulk quantities and project enquiries.
Industrial Supply Across India
Allarakhu & Sons serves industrial product enquiries across Surat, Delhi, Mumbai, Bengaluru, Pune, Hyderabad, Ahmedabad, Jaipur, Chennai, Chandigarh, Lucknow, Goa, Indore, Nagpur, Dehradun, Kochi, Shimla, Srinagar, Noida and Gurugram.
Customers throughout India can contact Allarakhu & Sons for industrial valve requirements, bulk orders and project-based supply.
How to Select the Right Electrically Operated Butterfly Valve
Before selecting the valve, consider the pipeline diameter, operating pressure, operating temperature, pipeline medium, flange standard, disc material, lining material and electrical power supply.
The actuator input voltage should also be confirmed. The standard configuration uses 230 VAC, while 24 VDC can be provided on demand according to the specified configuration.
For outdoor installations, customers should also consider the required IP protection and environmental exposure.
Electrical Control Options
The electrical actuator configuration includes position indication, adjustable centre stopping and inbuilt micro-switch position feedback.
The actuator is specified as compatible with BMS and PLC systems, making it suitable for installations where valve operation needs to be integrated into a building or industrial control system.
Control panels and magnetic sensors can also be provided according to the applicable automated tank-filling system requirement.
Optional Configurations
The product source specifies several optional configurations according to requirement.
- 24 VDC input voltage
- IP67 protection
- IP68 protection
- CF8M / S.S 316 disc
- Neoprene lining
- Viton lining
- Silicon lining
- Buna-N lining
- Control panel
- Magnetic sensor
Product Enquiry and Bulk Orders
Allarakhu & Sons accepts enquiries for individual requirements, bulk quantities and industrial projects.
For a quotation, provide the required valve size, quantity, pipeline medium, operating pressure, operating temperature, electrical supply and delivery location.
Frequently Asked Questions
What is this butterfly valve used for?
This valve is designed for suitable industrial pipeline flow isolation and control applications requiring electrical actuator operation.
What is the pressure rating?
The valve has a PN 1.6 pressure rating with a maximum working pressure of 1.6 MPa.
What is the seat test pressure?
The specified hydrostatic seat test pressure is 1.76 MPa.
What is the shell test pressure?
The specified hydrostatic shell test pressure is 2.4 MPa.
What is the maximum working temperature?
The specified maximum working temperature is 90°C.
What is the disc material?
The standard disc is stainless steel specified as IS 3444 Grade 1 / ASTM A351 Grade CF8, corresponding to the S.S 304 configuration.
Can an S.S 316 disc be supplied?
Yes. A CF8M / S.S 316 disc can be provided according to requirement.
What electrical voltage is used?
The standard input voltage is 230 VAC. A 24 VDC input configuration can also be provided on demand.
Is the actuator compatible with PLC systems?
Yes. The product source specifies compatibility with BMS and PLC applications.
Does the actuator provide position feedback?
Yes. The actuator includes inbuilt micro-switch position feedback.
Is outdoor installation possible?
IP67 / IP68 protection is available for outdoor applications. A canopy is advised for enhanced protection from continuous weather exposure.
What sizes are available?
The specified sizes range from 40 mm to 300 mm, including 40, 50, 65, 80, 100, 125, 150, 200, 250 and 300 mm.
Which media are suitable?
The specified suitable media include steam, water, oil, air and gases, subject to correct material and lining compatibility.
Where can I get an electrically operated butterfly valve in Surat?
Allarakhu & Sons supplies industrial valves from Surat, Gujarat, and can assist with product availability, technical requirements, quantities and quotations.
Can I request a bulk quotation?
Yes. Customers can provide the required size, quantity, application, electrical supply and delivery location for bulk or project-based quotation requirements.
Get a WhatsApp Quotation
Need a quotation for Butterfly Valve (Wafer Type), PN 1.6 with Electrical Actuator? Send your requirement on WhatsApp for product availability, pricing and bulk order assistance.
WhatsApp us with:
- Required valve size
- Required quantity
- Pipeline application or media
- Operating pressure
- Operating temperature
- Electrical voltage requirement
- Required lining
- Delivery location
Request a Quote
Looking for Butterfly Valve (Wafer Type), PN 1.6 with Electrical Actuator for an industrial pipeline or automated flow-control system? Contact Allarakhu & Sons for product availability, pricing and bulk requirements.
Allarakhu & Sons
A-3, 7/4720, Badri Mansion,
Lal Darwaja, Station Road,
Surat – 395003, Gujarat, India
Mobile: 9825178797
