Male Female Ball Valves PRODUCT INTRODUCTION
Male Female Ball Valves Suppliers in Surat can support industrial piping requirements where a valve with one male-threaded connection and one female-threaded connection is required. This configuration allows the valve to connect directly between compatible threaded components without requiring the same connection type at both ends.
The referenced TU-LOK product range includes Male X Female Ball Valves with lever operation, inlet sizes from 1/4″ to 1″ and outlet connections listed as RC 1/4″ to 1″. The source also identifies applications including hydraulic oil, gas, LPG, natural gas and water. These specifications should be confirmed against the exact valve configuration being supplied before quotation.
For industrial procurement, buyers should confirm the required size, thread standard, connection arrangement, operating pressure, temperature and service media before selecting the valve.
Male Female Ball Valves PRODUCT OVERVIEW
A Male Female Ball Valve combines two different threaded connection arrangements within one valve. One side uses a male connection while the opposite side uses a female connection.
This configuration can be useful when connecting a valve directly between components with different threaded interfaces. It can reduce the need for an additional threaded adapter or nipple where the valve and piping arrangement are compatible.
The supplied source identifies Male X Female Ball Valve configurations for low-pressure, high-pressure and panel-mounted applications. The actual configuration should be selected according to the installation and service requirements.
Male Female Ball Valves KEY FEATURES
- Male X Female threaded configuration
- Lever handle operation
- Compact inline valve arrangement
- Inlet connection range listed from 1/4″ to 1″
- Outlet connection listed as RC 1/4″ to 1″
- Material options identified by the source include brass and stainless steel
- Additional alloy options are listed by the source
- Working temperature range stated by the source as -20°C to 120°C
- Pressure rating stated by the source up to 6000 PSI
- Suitable source-listed applications include hydraulic oil, gas, LPG, natural gas and water
- 100% pressure testing stated by the source
These specifications should be confirmed for the exact product configuration before being treated as Allarakhu and Sons’ confirmed supply specification.
Male Female Ball Valves TECHNICAL SPECIFICATIONS
| Specification | Source Product Information |
|---|---|
| Product Type | Male X Female Ball Valve |
| Connection Configuration | Male X Female |
| Inlet Connection | 1/4″ to 1″ |
| Outlet Connection | RC 1/4″ to 1″ |
| Operation | Lever Handle |
| Material Options | SS 304, SS 316, Brass, Duplex, Super Duplex, Inconel, Monel, Hastelloy, Titanium, SMO 254 and other alloys |
| Pressure Rating | Up to 6000 PSI |
| Working Temperature | -20°C to 120°C |
| Testing | 100% pressure tested |
| Source-listed Applications | Hydraulic Oil, Gas, LPG, NG and Water |
| Source Model Reference | T-900 M X F / T-900 M X F-T |
The table above is based on the referenced TU-LOK product page. Allarakhu and Sons should verify the exact material, size, pressure and configuration available before publishing these as confirmed product specifications.
Male Female Ball Valves SIZE RANGE
The referenced product page lists inlet connections from:
1/4″ to 1″
The dimensional information also lists:
1/8″
1/4″
3/8″
1/2″
3/4″
1″
The exact commercially available size range should be confirmed for the particular model and configuration required by the customer.
CONNECTION OPTIONS
The defining feature of this valve configuration is the Male X Female connection arrangement.
The male side provides an external threaded connection, while the female side provides an internal threaded connection.
The referenced source lists the outlet connection as RC 1/4″ to 1″ and identifies BSP and NPT threaded ball valve categories within its wider product range. The exact thread standard should therefore be confirmed for the specific valve selected.
DESIGN AND CONSTRUCTION
The Male X Female configuration is designed for threaded inline installation where the two sides of the piping or equipment connection require different thread interfaces.
The source identifies brass and stainless steel among its material options, together with several alloy options for the product range. It also lists a brass stem, bronze body and end cap, PTFE seat and chromium-plated brass ball for one specified material configuration. These component materials should not be assumed for every variant.
For procurement, the material specification should be confirmed according to the actual valve configuration and application.
PRESSURE INFORMATION
The referenced TU-LOK page states a maximum operating pressure of up to 6000 PSI at nominal temperatures.
The actual pressure capability should be confirmed according to:
- Valve size
- Material
- Connection configuration
- Operating temperature
- Service media
- Selected model
- Project requirements
Do not assume the maximum stated source pressure applies to every available configuration.
THREAD CONFIGURATION
A key selection factor for a Male Female Ball Valve is the thread arrangement.
Before ordering, confirm:
- Male thread size
- Female thread size
- Thread standard
- Connection direction
- Piping compatibility
- Equipment connection
- Required sealing method
BSP and NPT are common terminology in this product category, but the exact thread standard must be confirmed for the selected valve.
INDUSTRIAL APPLICATIONS
Based on the referenced product information, potential applications include suitable:
- Hydraulic oil systems
- Gas installations
- LPG systems
- Natural gas applications
- Water systems
- Industrial piping
- Instrumentation connections
- Equipment connections
- Maintenance and replacement work
- Compact threaded piping arrangements
The suitability of a particular valve for any application depends on the actual material, pressure, temperature, connection and service media requirements. The source specifically lists hydraulic oil, gas, LPG, natural gas and water applications.
HOW TO SELECT THE RIGHT VALVE
Confirm the Connection Arrangement
Verify that one side requires a male connection and the other requires a female connection.
Confirm the Size
Select the correct size based on the connected pipe, equipment or fitting.
Confirm the Thread Standard
Check whether the installation requires BSP, NPT or another specified thread standard.
Check Operating Conditions
Confirm the required pressure and temperature before selecting the valve.
Confirm the Media
Provide the actual fluid or gas being handled so the appropriate material and sealing configuration can be evaluated.
Confirm Material
For demanding industrial applications, confirm whether brass, stainless steel or another material is required.
Confirm Operation
The referenced configuration uses a lever handle. If automated operation is required, confirm whether another valve configuration is appropriate.
INDUSTRIAL BUYER GUIDE
When requesting a quotation, provide:
- Product name
- Required quantity
- Valve size
- Male thread size
- Female thread size
- Thread standard
- Operating pressure
- Operating temperature
- Service media
- Material requirement
- Application
- Delivery location
- Project specification
For size-specific requirements, buyers can mention terms such as 1/4″, 3/8″, 1/2″, 3/4″ or 1″ where applicable.
SUPPLIER IN SURAT
Allarakhu and Sons is based in Surat, Gujarat, and supplies industrial products for engineering, fabrication, manufacturing, maintenance and other business requirements.
Businesses looking for Male Female Ball Valves in Surat can provide their required size, thread configuration, material, operating conditions and quantity when making an enquiry.
This approach helps match the enquiry to the actual piping or equipment connection instead of selecting a valve based only on its name.
GUJARAT INDUSTRIAL & GIDC RELEVANCE
Industrial businesses across Surat and Gujarat may require threaded valves for equipment connections, piping installations, maintenance work and engineering projects.
Relevant industrial locations include:
- Surat GIDC
- Sachin GIDC
- Pandesara
- Udhna
- Hazira
- Palsana
- Kadodara
- Ankleshwar GIDC
- Bharuch GIDC
- Vapi GIDC
For industrial enquiries from these areas, buyers should provide technical requirements along with the delivery location.
INDIA-WIDE INDUSTRIAL ENQUIRY
Allarakhu and Sons can receive industrial product enquiries from businesses across India, including Surat, Delhi, Mumbai, Bengaluru, Pune, Hyderabad, Ahmedabad, Jaipur, Chennai, Chandigarh, Lucknow, Goa, Indore, Nagpur, Dehradun, Kochi, Shimla, Srinagar, Noida and Gurugram.
For India-wide sourcing enquiries, provide the required valve size, connection configuration, thread standard, material, operating conditions and quantity.
B2B PRODUCT ENQUIRY
Allarakhu and Sons
Mob. 9825178797
A-3, 7/4720, Badri Mansion,
Lal Darwaja Station Road,
Surat – 395003, Gujarat, India
For a Male Female Ball Valve enquiry, provide:
- Required size
- Male connection
- Female connection
- Thread standard
- Quantity
- Material requirement
- Pressure
- Temperature
- Service media
- Application
- Delivery location
Contact Allarakhu and Sons for product details and quotation requirements.
FREQUENTLY ASKED QUESTIONS
What is a Male Female Ball Valve?
A Male Female Ball Valve has one male-threaded connection and one female-threaded connection. This configuration is designed for installations where the two connected components require different threaded interfaces.
What does Male X Female mean on a ball valve?
Male X Female means that one side has an external male thread while the opposite side has an internal female thread.
What sizes are available?
The referenced TU-LOK product information lists inlet connections from 1/4″ to 1″ and provides dimensional information for sizes including 1/8″, 1/4″, 3/8″, 1/2″, 3/4″ and 1″. The exact available size should be confirmed for the required configuration.
What thread standards can be used?
The product category includes BSP and NPT configurations, but the exact thread standard should be confirmed for the specific valve and connection requirement.
What is the pressure rating?
The referenced source states a maximum operating pressure of up to 6000 PSI at nominal temperatures. The applicable rating should be confirmed for the exact valve size and configuration.
What is the temperature range?
The referenced product page states a working temperature range of -20°C to 120°C. The applicable range should be confirmed for the selected material and configuration.
Which materials are available?
The referenced source lists SS 304, SS 316, Brass, Duplex, Super Duplex, Inconel, Monel, Hastelloy, Titanium and SMO 254 among its material options. The actual material availability should be confirmed before ordering.
What handle type is specified?
The referenced Male X Female Ball Valve uses a lever handle.
What applications are listed for the product?
The source lists hydraulic oil, gas, LPG, natural gas and water applications. Actual suitability should be confirmed against the operating conditions and selected valve configuration.
What information should I provide when requesting a quotation?
Provide the required size, male and female connection details, thread standard, material, pressure, temperature, service media, quantity and delivery location.
