3-Piece Ball Valves for Industrial Piping Applications
PRODUCT INTRODUCTION
3-Piece Ball Valves are designed for industrial piping and flow-control requirements where full-port, three-piece construction is required. Allarakhu and Sons offers this product range in sizes from 1/2″ to 4″ (DN 15 to DN 100), with PN 40 working pressure and multiple connection options including screwed female ends, socket weld ends and butt weld ends.
The specified design includes a blow-out-proof stem and precision investment-cast construction. A handle with a locking device is available on request. Screwed configurations can be provided to standards including BS 21 BSP/BSPT, NPT, DIN 259/2999, ISO 228 and ISO 7/1, subject to the selected configuration.
For industrial procurement, buyers should confirm the required size, pressure, connection type, thread standard and project specifications before placing an enquiry.
PRODUCT OVERVIEW
The 3-piece construction provides a practical valve configuration for industrial piping applications. Its full-port design is specified for the product range, while the available end connections allow selection according to the piping arrangement.
The specified size range covers 1/2″ to 4″, corresponding to DN 15 to DN 100.
The product specification includes PN 40 working pressure, BSEN ISO 17292 (BS 5351) design standard, blow-out-proof stem construction and precision investment casting.
KEY FEATURES
- Full-port design
- Three-piece body construction
- Size range from 1/2″ to 4″
- DN 15 to DN 100
- PN 40 working pressure
- BSEN ISO 17292 (BS 5351) design standard
- Blow-out-proof stem
- Precision investment-cast construction
- Handle with locking device available on request
- Screwed female ends
- Socket weld ends
- Butt weld ends
- Multiple specified thread standards for applicable screwed configurations
TECHNICAL SPECIFICATIONS
| Specification | Details |
|---|---|
| Product Type | 3PC Screwed End Ball Valve |
| Body Construction | 3-Piece |
| Port Design | Full Port |
| Size Range | 1/2″ to 4″ |
| Nominal Size | DN 15 to DN 100 |
| Working Pressure | PN 40 |
| Design Standard | BSEN ISO 17292 (BS 5351) |
| Stem | Blow Out Proof Stem |
| Casting | Precision Investment Casted |
| Locking Device | Available on request |
| Thread Standards | BS 21 BSP/BSPT, NPT, DIN 259/2999, ISO 228 & ISO 7/1 |
| Connection Options | Screwed Female Ends, Socket Weld Ends, Butt Weld Ends |
SIZE RANGE
The specified size range is:
1/2″ to 4″
Nominal diameter:
DN 15 to DN 100
The required size should be selected according to the piping system and project requirements.
For a quotation, buyers should provide the required valve size or DN size wherever possible.
CONNECTION OPTIONS
Screwed Female Ends
Screwed female ends are available for applicable threaded installations. The supplied specification includes BS 21 BSP/BSPT, NPT, DIN 259/2999, ISO 228 and ISO 7/1 thread standards.
Socket Weld Ends
Socket weld ends are available where this connection configuration is required by the piping arrangement.
Butt Weld Ends
Butt weld ends are also available for applicable piping installations.
The required connection should be confirmed according to the existing piping design and project specification.
DESIGN STANDARD
The specified design standard is:
BSEN ISO 17292 (BS 5351)
Buyers should verify the applicable project requirements before final product selection.
PRESSURE RATING
The specified working pressure is:
PN 40
The pressure requirement should be confirmed against the actual operating and project conditions before ordering.
THREE-PIECE CONSTRUCTION
The three-piece body configuration is designed for industrial valve applications where the valve construction and service requirements need to be considered during product selection.
When purchasing, buyers should confirm the required body configuration, connection type, size and project specification.
The full-port design is part of the supplied product specification and should be considered together with the piping requirements.
INDUSTRIAL APPLICATIONS
The product can be considered for suitable industrial piping and flow-control requirements based on the specified size, pressure and connection configuration.
Potential application areas include:
- Industrial piping systems
- Engineering installations
- Manufacturing facilities
- Fabrication projects
- Process piping applications
- Industrial maintenance requirements
- General flow-control installations
- Piping replacement projects
- Industrial equipment connections
- Commercial and industrial infrastructure
Final selection should be based on the actual service conditions and project requirements.
HOW TO SELECT THE RIGHT VALVE
Required Size
Confirm the required size from 1/2″ to 4″ or DN 15 to DN 100.
Working Pressure
Confirm whether PN 40 meets the project’s pressure requirement.
Connection Type
Identify whether the installation requires:
- Screwed female ends
- Socket weld ends
- Butt weld ends
Thread Standard
For threaded configurations, confirm the required standard such as BSP, BSPT, NPT, DIN 259/2999, ISO 228 or ISO 7/1.
Project Specification
If the valve is required for a specific project, provide the applicable technical specification before ordering.
INDUSTRIAL BUYER GUIDE
When requesting a quotation, provide:
- Product name
- Required quantity
- Valve size
- DN size
- Working pressure
- Connection type
- Thread standard
- Socket weld or butt weld requirement
- Application
- Delivery location
- Project specification, if applicable
Providing these details helps keep the product enquiry aligned with the actual technical requirement.
SUPPLIER IN SURAT
Allarakhu and Sons is based in Surat, Gujarat, and supplies industrial products for business and industrial requirements.
The company’s product range includes valves, steel pipes, structural steel and industrial hoses. These products are relevant to engineering, fabrication, manufacturing, construction-related and industrial procurement requirements.
Businesses in Surat requiring this valve configuration can contact Allarakhu and Sons with their required size, pressure rating, connection type and quantity.
GUJARAT INDUSTRIAL & GIDC RELEVANCE
Surat and the surrounding Gujarat industrial belt have engineering, manufacturing, fabrication and industrial operations where valves and piping products may be required for projects and maintenance.
Relevant industrial locations include:
- Surat GIDC
- Sachin GIDC
- Pandesara GIDC
- Udhna
- Hazira
- Palsana
- Kadodara
- Ankleshwar GIDC
- Bharuch GIDC
- Vapi GIDC
Allarakhu and Sons can receive industrial product enquiries from businesses in Surat and other Gujarat industrial locations.
INDIA-WIDE INDUSTRIAL ENQUIRY
Allarakhu and Sons can receive product enquiries from businesses across India, including Surat, Delhi, Mumbai, Bengaluru, Pune, Hyderabad, Ahmedabad, Jaipur, Chennai, Chandigarh, Lucknow, Goa, Indore, Nagpur, Dehradun, Kochi, Shimla, Srinagar, Noida and Gurugram.
For an enquiry, provide the required valve size, connection type, pressure requirement, quantity and delivery location.
B2B PRODUCT ENQUIRY
Allarakhu and Sons
Mob. 9825178797
A-3, 7/4720, Badri Mansion,
Lal Darwaja Station Road,
Surat – 395003, Gujarat, India
For an enquiry, provide:
- Required size
- DN size
- Quantity
- Pressure requirement
- Connection type
- Thread standard
- Application
- Delivery location
Contact Allarakhu and Sons for product details and quotation requirements.
FREQUENTLY ASKED QUESTIONS
What are 3-Piece Ball Valves?
They are ball valves featuring a three-piece body construction and full-port design. The supplied specification includes PN 40 working pressure.
What sizes are available?
The specified size range is 1/2″ to 4″, corresponding to DN 15 to DN 100.
What is the working pressure?
The specified working pressure is PN 40.
What does full port mean?
Full port refers to the specified full-port design of the valve. Buyers should consider this feature along with the piping and application requirements.
Are screwed female ends available?
Yes. Screwed female ends are one of the specified connection options.
Are socket weld ends available?
Yes. Socket weld ends are included among the specified connection options.
Are butt weld ends available?
Yes. Butt weld ends are also included among the specified connection options.
Which thread standards are specified?
The supplied information specifies BS 21 BSP/BSPT, NPT, DIN 259/2999, ISO 228 and ISO 7/1 for applicable screwed configurations.
Is a locking device available?
A handle with a locking device is available on request.
What information should I provide for a quotation?
Provide the required size, DN size, quantity, pressure requirement, connection type, thread standard, application and delivery location. Project specifications can also be provided where applicable.
