High Pressure Air Hose (Transparent)
High Pressure Air Hose is a transparent reinforced hose intended for suitable industrial compressed-air and pneumatic applications. Allarakhu & Sons welcomes enquiries from buyers who need to verify hose dimensions, working pressure, standard length and product suitability before ordering.
Product Overview
The referenced product specifications describe a transparent hose made with synthetic-yarn reinforcement between two or more layers of soft PVC. The reinforcement is described as running in crosswise and longitudinal directions. This construction is associated with the hose’s pressure-handling design and flexibility.
Choose the hose according to the requirements of the actual system. Confirm the internal diameter, wall thickness, working pressure at the relevant operating temperature, length and connection arrangement before purchase.
Key Product Features
- Transparent hose configuration.
- Soft PVC layers with synthetic-yarn reinforcement, as described in the referenced technical data.
- Reinforcement arranged in crosswise and longitudinal directions.
- Internal diameter options listed from 5 mm to 75 mm.
- Working pressure varies by diameter and is specified in the source table at 30°C.
- Standard hose lengths vary according to the selected diameter.
These points describe the supplied technical information. Confirm that the same specifications apply to the exact product being offered before publishing a quotation or placing an order.
Technical Specifications
The following dimensions, wall thicknesses, working pressures and standard lengths are transcribed from the referenced technical table. Pressure is stated at 30°C. Confirm the current manufacturer documentation for the exact product before use.
| Internal Diameter (mm) | Wall Thickness (mm) | Working Pressure at 30°C (kg/cm²) | Standard Length (m) |
|---|---|---|---|
| 5 | 2.35 | 15 | 50 / 100 / 200 |
| 6 | 3.1 | 25 | 50 / 100 |
| 8 | 3.35 | 25 | 50 / 100 |
| 10 | 3.5 | 25 | 50 / 100 |
| 12 | 3.6 | 20 | 50 / 100 |
| 15 | 4.1 | 20 | 50 / 100 |
| 20 | 4.5 | 20 | 50 / 100 / 200 |
| 25 | 4.8 | 15 | 50 / 100 |
| 30 | 4.8 | 15 | 30 / 50 / 100 |
| 40 | 5.3 | 15 | 30 / 50 / 60 / 100 |
| 50 | 6 | 10 | 30 / 50 / 60 |
| 65 | 7 | 7 | 15 / 30 |
| 75 | 8.5 | 6 | 15 / 30 |
Technical note: The table reports working pressure at 30°C, not burst pressure. Do not treat a working-pressure value as a burst-pressure rating or assume that the same rating applies at a different temperature. Verify operating limits and product suitability from the applicable technical documentation.
Size Range
The referenced data lists internal diameters of 5, 6, 8, 10, 12, 15, 20, 25, 30, 40, 50, 65 and 75 mm. Wall thickness and working pressure change with the selected size. Available stock and lengths must be confirmed for the required diameter.
Connection Options
The referenced technical page does not specify factory-fitted connections, end fittings or coupling standards for this product. If the hose will connect to existing equipment, provide the required connection dimensions and installation details when requesting a quotation. Confirm any fitting or assembly requirement before ordering.
Design and Construction
The referenced construction uses synthetic-yarn reinforcement positioned between two or more soft PVC layers. The reinforcement is described as extending in crosswise and longitudinal directions. Confirm the construction against the current documentation for the actual product supplied.
Pressure Information
The specified working pressure depends on the hose’s internal diameter. In the referenced table, the stated figures range from 6 kg/cm² to 25 kg/cm² at 30°C, depending on size. Refer to the complete size table above when evaluating a requirement.
Before selecting a hose, compare the system’s normal operating pressure and any pressure variation with the confirmed rating for the exact hose and operating conditions. Do not use the hose outside its documented limits.
Applications
The product reference identifies industrial compressed-air and pneumatic applications, including air-compressor systems, rock drilling, road digging and tyre-inflation stations. The appropriate hose size and pressure rating must be checked against the equipment and operating requirements.
The reference also mentions other transfer uses. Do not assume that the hose is compatible with every liquid, chemical or gas. Confirm written product approval for the exact medium and operating conditions before using it for anything other than the approved air or pneumatic service.
Product Selection Guide
When selecting a High Pressure Air Hose, provide the following details so the requirement can be reviewed:
- Required internal diameter.
- Required hose length and quantity.
- Normal operating pressure and any relevant pressure variation.
- Operating temperature.
- Equipment type and intended application.
- Connection or coupling requirements.
- Any applicable equipment specification or existing hose reference.
If you are replacing an existing hose, a clear photograph and measured dimensions can help explain the requirement. Do not choose a replacement based on appearance alone.
Industrial Buyer Guide
Maintenance teams, procurement departments, contractors and industrial operators should check dimensions, wall thickness, working pressure, standard length and connection requirements before specifying a hose. Confirm the intended service and product compatibility using current technical documentation.
For project or bulk enquiries, share a list of the required sizes, lengths and quantities. This helps the supplier understand the request and confirm the relevant availability and quotation details.
High Pressure Air Hose Supplier in Surat
Allarakhu & Sons is based in Surat, Gujarat, and welcomes enquiries for transparent high-pressure air hose requirements. Share your required size, length, operating conditions and quantity so the team can discuss the product specification and confirm availability.
Gujarat Industrial and GIDC Enquiries
Enquiries may come from Surat GIDC, Sachin GIDC, Pandesara, Udhna, Hazira, Palsana and Kadodara, as well as Ankleshwar GIDC, Bharuch GIDC and Vapi GIDC. Buyers should confirm product availability, quotation details and delivery arrangements directly for their location.
India-Wide Industrial Enquiries
Industrial buyers from Surat, Ahmedabad, Mumbai, Delhi, Pune, Bengaluru, Hyderabad, Jaipur, Chennai, Chandigarh, Lucknow, Goa, Indore, Nagpur, Dehradun, Kochi, Shimla, Srinagar, Noida and Gurugram can contact Allarakhu & Sons with their requirements. Enquiries from other locations across India are also welcome; supply and delivery arrangements must be confirmed before ordering.
B2B Product Enquiry
For a quotation, share the required internal diameter, standard or required length, quantity, intended application, operating pressure and temperature, and connection requirements. The team can then confirm whether the requested specification is available.
Contact Allarakhu & Sons
Address: A-3, 7/4720, Badri Mansion, Lal Darwaja Station Road, Surat – 395003, Gujarat, India.
Call:
+91 98251 78797 |
+91 84011 31000
WhatsApp:
Message +91 98251 78797 |
Message +91 84011 31000
Explore Allarakhu & Sons
- Allarakhu & Sons Home Page
- Industrial Hoses Main Category
- Braided Hoses Product Category
- Contact Allarakhu & Sons
Frequently Asked Questions
What is a transparent high-pressure air hose used for?
The referenced product information identifies industrial compressed-air and pneumatic service, including air-compressor systems and certain drilling or road-work applications. Confirm the exact hose’s suitability for the equipment before use.
What internal diameters are listed?
The referenced technical table lists 5, 6, 8, 10, 12, 15, 20, 25, 30, 40, 50, 65 and 75 mm. Confirm the current availability of the required size before ordering.
What is the working pressure of this hose?
It varies by internal diameter. The referenced table specifies working pressures at 30°C from 6 kg/cm² to 25 kg/cm². Review the size-specific table and verify the applicable product documentation.
What standard lengths are available?
The referenced standard lengths vary by diameter, with listed options ranging from 15 metres to 200 metres. Confirm the length options available for the required size and order.
Are connection fittings included?
The referenced technical page does not specify included fittings or connection standards. Share your connection requirements and confirm them with the supplier before ordering.
Can it be used for water, chemicals or gases?
Do not assume compatibility from the hose name alone. Confirm that the exact product is approved for the particular medium, pressure, temperature and service conditions before using it outside the documented air or pneumatic application.
How can I request a quotation?
Call or WhatsApp Allarakhu & Sons using the links above. Share the required diameter, length, quantity, application and operating conditions to help the team assess your enquiry.
