0.6 mm Wall Thickness
PU Duct Hose with 0.6 mm Wall Thickness
0.6 mm Wall Thickness is the specified wall-thickness option for this PU Duct Hose product. It is intended for industrial buyers looking for polyurethane ducting with a defined wall-thickness specification for their equipment and ducting installations.
Wall thickness is an important consideration when selecting flexible ducting. However, it should always be evaluated alongside the hose diameter, reinforcement construction, material compatibility and operating conditions.
The correct PU duct hose configuration depends on the application. Buyers should confirm whether the installation involves air movement, suction, dust extraction or material conveying before finalising the product selection.
Allarakhu & Sons supports industrial product enquiries from Surat and other locations across India. Contact the supplier to confirm the available dimensions and technical configuration of the 0.6 mm option.
Product Overview
This product is listed under the PU Duct Hoses category and is identified by a wall thickness of 0.6 mm.
PU duct hoses are used in suitable industrial ducting arrangements where flexible routing is required. Depending on the construction and technical rating, polyurethane ducting can be considered for air movement, extraction and material-transfer systems.
The 0.6 mm specification refers specifically to the wall thickness. It does not represent the inner diameter, outer diameter or reinforcement-wire thickness.
Key Features
- Specified wall thickness of 0.6 mm.
- Polyurethane duct hose product category.
- Defined wall-thickness option for industrial ducting selection.
- Suitable for evaluation in flexible ducting arrangements.
- Product selection can be matched to required dimensions and operating conditions.
- Technical suitability should be verified against the exact manufacturer’s specification.
Technical Specifications
The supplied product name confirms the 0.6 mm wall-thickness specification. Other technical details should be confirmed for the exact product configuration before purchase.
| Parameter | Specification |
|---|---|
| Product name | 0.6 mm Wall Thickness |
| Product category | PU Duct Hose |
| Wall thickness | 0.6 mm |
| Product material category | Polyurethane (PU) |
| Inner diameter | Confirm with supplier |
| Outer diameter | Confirm with supplier |
| Reinforcement construction | Confirm with supplier |
| Operating temperature | Confirm with supplier |
| Working pressure | Confirm with supplier |
| Vacuum rating | Confirm with supplier |
| Minimum bending radius | Confirm with supplier |
| Standard coil length | Confirm with supplier |
| Colour | Confirm with supplier |
Size Range
The 0.6 mm specification refers to the wall thickness of the PU duct hose. The available diameter options should be checked separately.
Before ordering, confirm the following measurements:
- Inner diameter: The internal bore required for the ducting system.
- Outer diameter: The external measurement needed for installation clearance and connection compatibility.
- Wall thickness: The specified 0.6 mm thickness.
- Length: The required coil or installation length.
Do not assume that every diameter is available with the same wall-thickness configuration. Confirm the size-wise product range with the supplier.
Connection Options
The available product information does not confirm specific connection types, cuffs, clamps or end fittings for this 0.6 mm option.
For installation planning, check the mating equipment dimensions and required connection arrangement. Confirm whether the application requires plain ends, clamps, cuffs or other accessories before placing an order.
Design and Construction
This product belongs to the PU Duct Hoses category and is identified by a 0.6 mm wall thickness.
The exact wall material grade, reinforcement material, spiral construction, surface finish and transparency should be confirmed against the manufacturer’s technical datasheet.
These construction details are important because they influence flexibility, mechanical support, wear resistance and suitability for the intended conveying or extraction system.
Pressure and Vacuum Information
Wall thickness alone does not establish the working pressure or vacuum capacity of a flexible duct hose. These ratings depend on the complete construction, diameter, reinforcement and operating conditions.
The working-pressure and vacuum ratings for this specific 0.6 mm product option have not been confirmed in the available product information.
Important: Do not select or operate the duct hose based only on its wall thickness. Confirm the manufacturer’s permitted pressure and vacuum limits for the exact diameter and construction before installation.
Industrial Applications
PU duct hoses are used in various industrial ducting arrangements. Depending on the exact construction and application compatibility, the following are potential areas where polyurethane ducting may be evaluated.
Industrial Dust Extraction
Flexible ducting may be used in suitable dust-collection arrangements connected to extraction equipment. Confirm the hose’s wear resistance, reinforcement and vacuum rating for the dust being collected.
Woodworking and Furniture Processing
Woodworking facilities may require flexible duct routes for collecting sawdust, wood particles and similar materials. The selected hose must be suitable for the material characteristics and extraction conditions.
Industrial Air Movement
Flexible ducting can help route air through industrial equipment and ventilation arrangements where a fixed rigid duct route is not practical.
Powder and Granule Conveying
Some polyurethane duct hose constructions are used for conveying suitable powders, granules, fibres and other light materials. Confirm the material compatibility, abrasion requirements and operating limits before use.
Textile and Paper Processing
Industrial textile and paper-processing equipment may use suitable flexible ducting for air movement and collection of lightweight process materials. Confirm the exact hose suitability for the installation.
Product Selection Guide
Before selecting the 0.6 mm wall-thickness PU duct hose, review the following requirements:
- Wall thickness: Confirm that 0.6 mm is the required specification.
- Inner diameter: Match the hose bore with the equipment connection.
- Outer diameter: Check the required installation clearance.
- Application: Identify whether the hose is required for airflow, suction, extraction or material conveying.
- Material compatibility: Check the suitability of the hose for the conveyed material.
- Reinforcement: Confirm the construction needed for the installation.
- Vacuum rating: Verify the required suction capacity if used in an extraction system.
- Temperature: Confirm the operating temperature range.
- Bending radius: Check the minimum permitted bend for the installation route.
- Length: Confirm the available coil length and required quantity.
Industrial Buyer Guide
Procurement teams, maintenance engineers and industrial equipment buyers should evaluate the complete technical specification before ordering a PU duct hose.
- Confirm the required 0.6 mm wall thickness.
- Measure the equipment connection and required hose diameter.
- Identify the material or air stream passing through the duct.
- Check whether the system operates under suction or pressure.
- Verify the reinforcement construction and flexibility requirements.
- Confirm the permitted operating temperature.
- Check the vacuum rating and bending radius where applicable.
- Specify the required coil length and quantity.
- Confirm the connection accessories needed for installation.
- Request the technical datasheet for critical industrial applications.
PU Duct Hose Supplier in Surat
Allarakhu & Sons serves industrial and commercial buyers looking for ducting and industrial product solutions in Surat, Gujarat.
Businesses searching for a PU duct hose with 0.6 mm wall thickness can contact Allarakhu & Sons for product enquiries and technical specification confirmation.
Share the required inner diameter, outer diameter, wall thickness, application, operating conditions and quantity to help identify the suitable product configuration.
Gujarat Industrial and GIDC Relevance
Businesses operating in Gujarat’s industrial and manufacturing locations can enquire about PU duct hose requirements for suitable extraction, ventilation and material-handling installations.
Relevant industrial locations include:
- Surat GIDC
- Sachin GIDC
- Pandesara
- Udhna
- Hazira
- Palsana
- Kadodara
- Ankleshwar GIDC
- Bharuch GIDC
- Vapi GIDC
Confirm the hose’s technical suitability for the specific operating conditions at each installation.
India-Wide Industrial Enquiries
Allarakhu & Sons welcomes product enquiries from industrial buyers across India, including Surat, Delhi, Mumbai, Bengaluru, Pune, Hyderabad, Ahmedabad, Jaipur, Chennai, Chandigarh, Lucknow, Goa, Indore, Nagpur, Dehradun, Kochi, Shimla, Srinagar, Noida and Gurugram.
For enquiries outside Surat, share the delivery location, required diameter, wall thickness, quantity and intended application. Confirm availability, dispatch arrangements and delivery timelines directly with the supplier.
B2B Product Enquiry
To enquire about the 0.6 mm wall-thickness PU duct hose, provide the following details:
- Required wall thickness: 0.6 mm.
- Required inner diameter.
- Required outer diameter, if specified.
- Application and material being conveyed.
- Operating temperature.
- Required working pressure or vacuum rating.
- Minimum bending-radius requirement.
- Required coil length.
- Connection or clamp requirements.
- Quantity required.
- Delivery location.
Allarakhu & Sons
A-3, 7/4720, Badri Mansion,
Lal Darwaja Station Road,
Surat – 395003, Gujarat, India.
Phone: +91 98251 78797 / +91 84011 31000
Website: https://allarakhuandsons.in/
Frequently Asked Questions
What does 0.6 mm wall thickness mean?
It refers to the specified thickness of the duct hose wall. It is different from the inner diameter, outer diameter and reinforcement-wire dimensions.
What is a 0.6 mm wall-thickness PU duct hose?
It is a polyurethane duct hose option identified by a 0.6 mm wall-thickness specification. Its suitability depends on the complete construction and the operating requirements of the application.
What is PU duct hose used for?
PU duct hoses are used in suitable industrial ducting arrangements for air movement, extraction and material conveying. The exact applications depend on the hose construction and material compatibility.
Is 0.6 mm the inner diameter of the hose?
No. The 0.6 mm measurement refers to wall thickness. Inner diameter is a separate measurement used to determine the internal bore of the duct hose.
How do I select the correct PU duct hose diameter?
Check the inner diameter required by the equipment or duct connection. Also verify the outer diameter, installation clearance and connection arrangement.
What is the working pressure of this 0.6 mm PU duct hose?
The specific working-pressure rating has not been confirmed in the available product information. Request the manufacturer’s technical rating for the exact diameter and construction.
Can this hose be used for dust extraction?
PU duct hoses are used in some dust-extraction applications. Confirm that this particular construction is suitable for the dust type, particle characteristics and vacuum conditions of your system.
What temperature range can this hose handle?
The operating temperature range for this specific product option has not been confirmed. Request the technical datasheet before using it in temperature-sensitive applications.
Are clamps or fittings included?
The available product information does not confirm whether clamps, cuffs or fittings are included. Confirm the connection arrangement when requesting a quotation.
How can I enquire about 0.6 mm PU duct hose in Surat?
Contact Allarakhu & Sons at +91 98251 78797 or +91 84011 31000. Share your required diameter, application, quantity and operating conditions for product enquiry support.
