M.D. (Green) Suction Hose
M.D. (Green) suction hose is intended for suitable medium-duty suction and delivery applications where the hose construction, internal diameter and working-pressure rating match the operating requirements. Allarakhu and Sons welcomes enquiries from agricultural businesses, contractors, maintenance teams and industrial buyers who need to confirm hose specifications before ordering.
Product Overview
This green suction and delivery hose is described in published product information as having a soft PVC wall reinforced with rigid PVC spirals. The spiral-reinforced construction is intended for applications where a flexible hose is required for drawing in and conveying compatible liquids.
The right selection depends on the liquid being transferred, the required bore size, the pressure and suction conditions, the installation route and the connection arrangement. Buyers should confirm the specification for the exact size before using the hose in a working system.
Key Features
- Green medium-duty suction and delivery hose designation.
- Published product construction describes a soft PVC wall reinforced with rigid PVC spirals.
- Published information indicates an internal diameter range of 20 mm to 100 mm; confirm the sizes currently available.
- Working-pressure information is listed as a range that varies by size, with the referenced figures stated at 30°C.
- Intended applications should be assessed against the hose material, operating conditions and liquid compatibility.
These points describe the available product information. They do not replace the current datasheet or confirm suitability for every liquid, pressure or installation.
Technical Specifications
The following table summarises the available indexed information for the M.D. (Green) product. Please verify the details against the current specification sheet for the exact size before placing an order.
| Specification | Available information |
|---|---|
| Product name | M.D. (Green) Suction Hose |
| Hose type | Medium-duty suction and delivery hose |
| Colour | Green |
| Construction | Soft PVC wall with rigid PVC spiral reinforcement, as described in published product information |
| Internal diameter range | 20 mm to 100 mm; confirm exact available sizes |
| Working pressure | 3.5 kg/cm² to 7 kg/cm², as a published range that varies by size |
| Pressure reference temperature | 30°C |
| Burst pressure | Not confirmed; request the applicable size-specific value |
| Vacuum rating | Not confirmed; request the rating for the intended suction duty |
| Temperature range | Not confirmed by the accessible product information |
| Available lengths | Confirm the current coil or supply lengths |
| End connections and fittings | Confirm the required arrangement and whether fittings are included |
Size Range
Published information indicates an internal diameter range of 20 mm to 100 mm. This range should not be treated as confirmation that every intermediate size is currently available. When requesting a quotation, specify the required bore in millimetres or inches and the length needed for the installation.
For replacement work, compare the existing hose’s internal diameter and connection requirements with the proposed replacement. Where possible, share the markings on the old hose or its technical datasheet so that the required size can be checked.
Connection Options
The available connection arrangements and supplied fittings were not confirmed in the accessible product information. Before ordering, check the pump inlet or outlet, required hose bore, fitting type and retention method. Confirm whether clamps, adaptors or other connection accessories are required and whether they are included in the quotation.
Design and Construction
The published description identifies a soft PVC wall and rigid PVC spiral reinforcement. This construction information can help buyers understand the general hose design, but it is not a substitute for a complete technical drawing or a size-specific datasheet.
For applications involving repeated movement, tight bends, suction duty or exposure to particular liquids, confirm the permitted bend radius, vacuum capability and material compatibility before installation.
Working Pressure and Suction Conditions
The available listing gives a working-pressure range of 3.5 kg/cm² to 7 kg/cm² at 30°C, with the appropriate figure depending on the hose size. Do not assume that the highest value applies to every diameter or operating condition.
Working pressure and vacuum capability are different parameters. If the hose will be used on a pump suction line, request the relevant vacuum rating and operating guidance for the selected size. Do not use an unverified burst-pressure value as a working-pressure rating.
Applications
Published product information lists irrigation and agricultural applications, saline water, light acids, alkalis and certain other chemical-transfer duties. Compatibility depends on the specific liquid, concentration, temperature and operating conditions.
Before using the hose for chemical transfer, confirm compatibility with the exact substance and concentration. The available listing excludes solvents; do not assume that the hose is suitable for solvents or for all chemicals. Suitability for any critical process should be confirmed from the current technical documentation.
Product Selection Guide
To identify a suitable M.D. (Green) suction hose, provide the following information when requesting a quotation:
- The liquid being conveyed and its concentration, where relevant.
- The required internal diameter and hose length.
- The normal working pressure and whether the installation operates under suction, delivery or both.
- The operating temperature and expected pressure variations.
- The pump, equipment or pipeline connection details.
- The quantity required and the delivery destination.
Providing these details helps the supplier check whether the requested specification matches the intended duty. Do not choose a hose solely by colour or nominal diameter.
Industrial Buyer Guide
For procurement and maintenance teams, a consistent specification reduces the chance of selecting an unsuitable replacement. Record the bore size, working-pressure requirement, suction duty, liquid compatibility, operating temperature and connection requirements for each installation.
For repeat purchases, retain the approved datasheet and record the exact size and supplied configuration. If the service conditions have changed since the previous purchase, review the specification again rather than assuming the same hose remains suitable.
M.D. (Green) Suction Hose Supplier in Surat
Allarakhu and Sons, based in Surat, Gujarat, welcomes enquiries for M.D. (Green) suction hose from businesses and buyers who need to confirm a suitable specification. Share your application, bore size, operating conditions and quantity so that the requirements can be reviewed before quotation.
For enquiries, contact Allarakhu and Sons on +91 98251 78797 or +91 84011 31000.
Gujarat Industrial and GIDC Enquiries
We welcome enquiries from industrial and agricultural buyers in Surat and nearby operating areas, including Surat GIDC, Sachin GIDC, Pandesara, Udhna, Hazira, Palsana and Kadodara. Buyers from Ankleshwar GIDC, Bharuch GIDC and Vapi GIDC can also share their application details, quantity and delivery requirements for review.
For a useful quotation, provide the liquid type, required hose diameter, pressure or vacuum conditions, length and connection details. Availability and delivery arrangements should be confirmed for each order.
India-Wide Product Enquiries
Allarakhu and Sons welcomes enquiries from buyers in Ahmedabad and other Gujarat locations, as well as major commercial and industrial centres including Mumbai, Pune, Delhi, Noida, Gurugram, Bengaluru, Hyderabad, Chennai, Jaipur, Chandigarh and Lucknow. Enquiries are also welcome from Indore, Nagpur, Goa, Dehradun, Kochi, Shimla, Srinagar and other locations across India.
Share your technical requirements and delivery destination so the product and supply details can be reviewed. Product availability, delivery timelines and any application-specific suitability must be confirmed before an order is finalised.
Request a Quotation
For a quotation on M.D. (Green) suction hose, contact Allarakhu and Sons with the required diameter, hose length, liquid being conveyed, working pressure, suction conditions, operating temperature and quantity. A current specification sheet or clear photograph of the existing hose markings can also help clarify a replacement requirement.
Allarakhu and Sons
A-3, 7/4720, Badri Mansion, Lal Darwaja Station Road, Surat – 395003, Gujarat, India
Phone: +91 98251 78797 / +91 84011 31000
Website: allarakhuandsons.in
Frequently Asked Questions
What is M.D. (Green) suction hose used for?
Published product information lists medium-duty suction and delivery duties, including agricultural irrigation and certain liquid-transfer applications. Confirm material compatibility and operating limits for the specific liquid and installation before use.
What sizes are listed for M.D. (Green) suction hose?
The available indexed listing indicates an internal diameter range of 20 mm to 100 mm. Confirm the exact available diameter and length with Allarakhu and Sons before ordering.
What is the working pressure of this hose?
The published range is 3.5 kg/cm² to 7 kg/cm² at 30°C, depending on size. Request the specific working-pressure rating for the diameter you intend to purchase.
Can this hose be used on a pump suction line?
The product is described as a suction and delivery hose, but the vacuum rating for the required size was not confirmed. Check the applicable suction or vacuum rating and operating guidance before using it on a pump inlet.
Is M.D. (Green) suction hose compatible with chemicals?
The available listing mentions light acids, alkalis and certain other chemicals, while excluding solvents. This does not establish universal chemical compatibility. Confirm the exact substance, concentration and temperature against the applicable product information.
What connection fittings are available?
Connection options and included fittings were not confirmed in the accessible product data. Share the pump or pipeline connection details so the required arrangement can be checked.
How can I request a quotation from outside Surat?
Contact Allarakhu and Sons with your application, size, quantity and delivery destination. The team can review the enquiry and confirm the applicable product and supply details.
