CS(WCB) Swing Type Check Valve Flanged in Surat
The CS(WCB) Swing Type Check Valve Flanged is designed for industrial piping systems that require automatic control of reverse flow. Its swing-disc mechanism responds to fluid movement, opening under forward flow and moving towards the seat when flow reduces or reverses. This helps protect compatible piping systems and connected equipment from unwanted backflow.
The supplied product listing describes a carbon steel WCB body, stainless steel internals and a bolted bonnet. The flanged-end design allows installation in a pipeline with matching flange dimensions. The listed nominal size is 3 inches, and thermic oil is identified as the intended application.
The source lists a temperature of 300°C and categorises the product as medium pressure. However, it does not state a numeric working-pressure rating or provide a pressure-temperature chart. Buyers should therefore confirm the permitted operating pressure at the intended temperature rather than relying on the general pressure classification.
For industrial procurement, check the fluid properties, required valve size, flange standard, internal material grade and operating conditions. Confirm the exact product configuration and documentation before using the valve in thermic oil or another high-temperature service.
Allarakhu and Sons, based in Surat, can be contacted for product enquiries. Share your pipeline specifications and quantity requirements so the appropriate configuration can be checked before quotation.
Product Short Description
CS(WCB) Swing Type Check Valve Flanged with a carbon steel body, stainless steel internals and bolted bonnet. The supplied listing specifies a 3-inch size, thermic oil application and 300°C temperature. Confirm the working-pressure rating, flange dimensions and material details before ordering.
Key Features
-
Carbon steel WCB body as listed by the source.
-
Stainless steel internals.
-
Swing-type disc mechanism for automatic non-return operation.
-
Bolted bonnet construction.
-
Flanged end connection.
-
3-inch nominal size listed.
-
Thermic oil identified as the application.
-
Temperature listed as 300°C.
-
Medium-pressure classification stated by the source; numeric working pressure must be confirmed.
Technical Specifications
| Parameter | Source-listed information |
|---|---|
| Product name | CS(WCB) Swing Type Check Valve Flanged |
| Valve type | Swing-type check valve |
| Body material | Carbon steel |
| Body grade | WCB, as listed |
| Internal components | Stainless steel internals |
| Listed size | 3 inch |
| Bonnet construction | Bolted bonnet |
| End connection | Flanged |
| Media / application | Thermic oil |
| Temperature | 300°C |
| Pressure classification | Medium pressure |
| Numeric working-pressure rating | Not specified in the supplied listing |
| Design standard | Not specified for this exact product |
| Testing standard | Not specified for this exact product |
These are source-listed specifications, not a substitute for a manufacturer-approved datasheet. Confirm the precise body grade, internal material grade, flange details and permitted pressure-temperature conditions before purchasing.
Size Range
The supplied product listing specifies a 3-inch valve. It does not confirm the full size range available for this configuration.
If your pipeline requires a different size, contact Allarakhu and Sons to check availability and confirm the relevant dimensions before ordering.
Connection Options
The supplied listing specifies flanged ends. It does not fully document the flange dimensions or standard in the technical details provided.
Before ordering, confirm:
-
Required nominal pipe size.
-
Flange standard and pressure class.
-
Flange drilling and facing.
-
Face-to-face dimensions.
-
Pipeline alignment and installation space.
-
Compatibility with the operating temperature and pressure.
Do not assume that an existing flange connection will match without checking the product drawing.
Design and Construction
Carbon steel WCB body
The source identifies the body material as carbon steel WCB. Verify the material designation and any required material certificates against the final quotation and technical documentation.
Swing-type disc mechanism
The hinged disc moves in response to fluid flow. It opens when forward flow provides sufficient force and returns towards the seat as flow decreases or reverses. Actual closing performance depends on the valve design and pipeline conditions.
Stainless steel internals
Stainless steel internals are listed by the source. The exact grade and component-by-component material details are not provided, so these should be confirmed if the application requires specific material compatibility.
Bolted bonnet
The bolted bonnet is part of the listed construction. Confirm the maintenance procedure, gasket requirements and inspection access from the product documentation before planning servicing.
Flanged ends
The flanged connection is intended to mate with compatible pipeline flanges. Correct alignment, suitable gaskets and the specified bolting procedure are important during installation.
Pressure Information
The source classifies the product as medium pressure, but it does not state a numeric working-pressure rating.
The listed operating temperature is 300°C. At elevated temperatures, the allowable pressure can depend on the body material, valve design, flange rating and applicable pressure-temperature standard.
Before ordering, request confirmation of:
-
Maximum allowable working pressure at the required operating temperature.
-
Applicable pressure class and flange standard.
-
Body, bonnet and internal material specifications.
-
Design and testing standards.
-
Any application-specific requirements for thermic oil service.
Do not infer a working-pressure value from the phrase “medium pressure” or assume that a flange designation alone establishes the complete pressure-temperature rating.
Applications
The supplied listing identifies thermic oil as the application and specifies a temperature of 300°C. Suitability must be confirmed against the actual thermic oil, operating pressure, temperature range and system design.
Potential applications to evaluate include:
-
Thermic oil circulation systems.
-
Industrial heating and heat-transfer fluid pipelines.
-
Process lines requiring automatic reverse-flow prevention.
-
Industrial fluid systems with compatible operating conditions.
-
Maintenance and replacement projects requiring a flanged swing check valve.
These are potential application areas, not a guarantee of suitability for every installation. Confirm the valve’s pressure-temperature rating and material compatibility before using it in high-temperature service.
Product Selection Guide
When selecting a CS(WCB) Swing Type Check Valve Flanged, review these points before placing an order.
Pipeline size: Confirm whether the listed 3-inch size matches the required line.
Fluid: Identify the exact thermic oil or other process media and its operating conditions.
Temperature: Verify that the valve is rated for the actual operating temperature, including any expected temperature variations.
Working pressure: Obtain the numeric pressure rating for the required temperature. Do not rely on the general medium-pressure classification.
Body and internal materials: Confirm the carbon steel WCB body and the exact grades of the stainless steel internal components.
Flange compatibility: Check the flange standard, pressure class, facing and dimensions.
Closing behaviour: Discuss expected flow rates and pressure changes if reverse-flow control or pressure surge management is important.
Documentation: Request the current technical datasheet and any required inspection or test records.
Industrial Buyer Guide
For a clear quotation request, provide the following information:
-
Product name: CS(WCB) Swing Type Check Valve Flanged.
-
Required quantity.
-
Nominal size.
-
Fluid or media.
-
Normal and maximum operating pressure.
-
Normal and maximum operating temperature.
-
Required body and internal material grades.
-
Flange standard and pressure class.
-
Installation orientation.
-
Required testing or inspection documents.
-
Delivery destination.
If the valve is intended for thermic oil service at elevated temperature, make sure the supplier confirms the allowable working pressure at that temperature before finalising the purchase.
CS(WCB) Swing Type Check Valve Flanged Supplier in Surat
Allarakhu and Sons is based in Surat, Gujarat, and accepts industrial product enquiries. Buyers looking for a CS(WCB) Swing Type Check Valve Flanged can contact the company to discuss the required size, material, flange connection and operating conditions.
For projects involving thermic oil or other high-temperature applications, provide the technical specification so the relevant valve configuration can be checked before quotation.
Company: Allarakhu and Sons
Address: A-3, 7/4720, Badri Mansion, Lal Darwaja Station Road, Surat – 395003, Gujarat, India
Phone: +91 98251 78797 / +91 84011 31000
Website: https://allarakhuandsons.in/
Contact page: https://allarakhuandsons.in/contact-us/
Gujarat Industrial and GIDC Relevance
Industrial buyers in Surat and nearby manufacturing areas can enquire about this valve for compatible process pipeline requirements. Relevant industrial locations include Surat GIDC, Sachin GIDC, Pandesara, Udhna, Hazira, Palsana and Kadodara. Enquiries may also come from Ankleshwar GIDC, Bharuch GIDC and Vapi GIDC.
For high-temperature process systems, provide the required pressure, temperature, fluid and flange details so the product’s suitability can be checked.
India-Wide Industrial Enquiries
Allarakhu and Sons can receive industrial enquiries from Delhi, Mumbai, Bengaluru, Pune, Hyderabad, Ahmedabad, Jaipur, Chennai, Chandigarh, Lucknow, Goa, Indore, Nagpur, Dehradun, Kochi, Shimla, Srinagar, Noida and Gurugram, as well as other locations across India.
For procurement, include the required size, quantity, operating conditions and delivery destination. Confirm price, availability and delivery arrangements directly with the company.
Frequently Asked Questions
What is a CS(WCB) Swing Type Check Valve Flanged?
It is a swing-type check valve with a carbon steel WCB body and flanged ends, designed to help prevent reverse flow in compatible piping systems.
What material is listed for the valve body?
The supplied product listing specifies carbon steel WCB. It also lists stainless steel internals, but the exact grades should be confirmed.
What size is listed?
The source lists a 3-inch valve. Other sizes should be confirmed with the supplier.
What is the listed operating temperature?
The source lists 300°C. Confirm the allowable temperature and working-pressure rating for the exact model before use.
What pressure rating does the valve have?
The source describes it as medium pressure but does not provide a numeric working-pressure rating. Request the current datasheet to confirm the applicable pressure-temperature limits.
Is the valve suitable for thermic oil?
Thermic oil is the application listed by the source. Confirm the actual fluid, operating conditions and valve pressure-temperature limits before selecting it.
What is a bolted bonnet?
A bolted bonnet is a cover construction secured to the valve body with bolting. The precise maintenance and inspection requirements depend on the product design.
What should I check before ordering a flanged check valve?
Confirm the nominal size, flange standard, pressure class, face-to-face dimensions, fluid compatibility and operating conditions.
Where can I enquire about this valve in Surat?
Contact Allarakhu and Sons through the contact page or call +91 98251 78797 / +91 84011 31000.
B2B Product Enquiry
To enquire about a CS(WCB) Swing Type Check Valve Flanged, contact Allarakhu and Sons with your technical requirements.
Phone: +91 98251 78797 / +91 84011 31000
Contact page: https://allarakhuandsons.in/contact-us/
WhatsApp: Enquire about the CS(WCB) Swing Type Check Valve Flanged
For faster assistance, mention the required size, quantity, media, operating temperature, working pressure and flange standard.
